1. Taper bushes form the most convenient and cost effective method of fixing components to a
           Mating shaft, without the need for any machining process.
       2. Size ranges from 1008 to 120100,more information,please contact us.
       3. Easy to install and remove.
       4. Shallow keyway is available.
To Install:
1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already     assembled).Remove any oil.lacquer,or dirt.Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on one side only).
2.Oil thread and point of set screws or thread and under head of cap screws.Place screws loosely in holes thatare threaded in hub one side see install bore.
3.Make sure bushing is free in hub.Slip assembly onto shaft and locatd in position desired.
4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,please refer to taper bushing screw torque which need to be asked.
5.If stall key,place it in the shaft keyway before install taper bushing.
6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.
| Material choice | GG25 | Steel |
 Taper lock bushing,
        1. Taper bushes form the most convenient and cost effective method of fixing components to a
           Mating shaft, without the need for any machining process.
       2. Size ranges from 1008 to 120100,more information,please contact us.
       3. Easy to install and remove.
       4. Shallow keyway is available.
To Install:
1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already     assembled).Remove any oil.lacquer,or dirt.Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on one side only).
2.Oil thread and point of set screws or thread and under head of cap screws.Place screws loosely in holes thatare threaded in hub one side see install bore.
3.Make sure bushing is free in hub.Slip assembly onto shaft and locatd in position desired.
4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,please refer to taper bushing screw torque which need to be asked.
5.If stall key,place it in the shaft keyway before install taper bushing.
6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.
| Material choice | GG25 | Steel |
Â
The 1.6ton 3-way forklift is a special AC electric forklift designed for professional confined space storage use. Equipped with fork that can be rotated left and right, the forklift does not need to turn its body in the passage, minimizing the width the aisle. Compared with reach stacker, it can save 35% of the warehouse space, and its maximum lifting height can reach 9m.
To ensure the accuracy of high stacking, VDA's fork is equipped with HD camera and laser alignment system. The three-way Electric Stacker lift truck with electric fork has an EPAS steering system that ensures operation safety even if the motor has broken.
There are other safety designs: OPS (operator sensing system), driving lock, wheel display, turn speed limitation, regenerative braking, etc.
The 1.6ton 3-way forklift can be customized wtih other additional options (such as fixed height/floor lifting function, cold storage customization, traceless tire, magnetic track semi-automatic guide, hydraulic fork). And we believe this kind of VNA forklift will bring you excellent operation experience in modern storage era.
Vna Truck,Vna Forklift Truck,Very Narrow Aisle Truck,very narrow aisle lift truck,very narrow aisle forklift
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.zowellforklift.com