Clc Block Machine Clc Block Foaming Chemical Agent Cutting Machine

Flow Chart Of Autoclaved Aerated (AAC) Block Brick Machine Production line
 


(1). Autoclaved Aerated AAC Block Brick Machine Advantages
1. light weight
Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and  1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
2. Good heat preservation 
With a large number of pores inside, AAC has good heat preservation. Normally, AAC blocks with thickness of 200mm can preserve heat as well as those common solid clay blocks with thickness of 490mm.
3 Good fire resistance without releasing harmful gas
Main materials for AAC are inorganic. It has features of keeping temperature, resisting fire and releasing no harmful gas. With good heat preservation to the steels, buildings made of AAC bricks can only be destroyed by surface when they are on fire.  


(2). Cutting Machine Simple Introduction
The aac block brick machine cutting machine is developed based on the traditional cutting machine. It mainly refers to the WIHA technology. Its reducer and control elements are of domestic or international well-known brands, thus ensuring the stability of the machine.
Features: 
1). The aac block brick cutting machine utilizes the cylinder to tension the steel wire.Coupled with the frame swinging, the service life of the steel wire is greatly prolonged, and the product accuracy has been greatly improved as well.
2). With the mobile cutting table, the green brick placing and cross-cutting are accomplished at the same position. When the adobe moves downward to the next position, both vertical and horizontal cutting can be completed.
3). As the new chain-type cutting machine, it features high automation, convenient operation, accurate cutting, and short cutting period. With this machine, the production cycle will be greatly shortened and the labor productivity will be significantly improved. 


(3).Hydraulic Mould Crane
   This hydraulic mould crane is the main corollary equipment in the aerated concrete production. It allows the bricks together with the mould to be placed on the concrete cutting machine for die sinking or demolding. The bricks will be cut by the concrete cutting machine. Meanwhile, the hydraulic mould crane will recombine and clean the concrete mould, bottom plate. Then, it will brush the stripping oil for re-pouring.


(4). Slurry Making Machine
With the slurry making machine, you can crush and mix the coal ash into the paste type after you have added water.
 

(5).Autoclaved Aerated AAC Block Brick Macine Raw material proportion (sand and fly ash) 
 
  
(6).Other Corollary Equipment
Autoclave for AAC Block Brick Machine
Material storage silo
Cement silo
 

 
 
Please contact us to get more information about the AAC block machine production line.↓↓↓
  Flow Chart Of Autoclaved Aerated (AAC) Block Brick Machine Production line
 


(1). Autoclaved Aerated AAC Block Brick Machine Advantages
1. light weight
Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and  1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
2. Good heat preservation 
With a large number of pores inside, AAC has good heat preservation. Normally, AAC blocks with thickness of 200mm can preserve heat as well as those common solid clay blocks with thickness of 490mm.
3 Good fire resistance without releasing harmful gas
Main materials for AAC are inorganic. It has features of keeping temperature, resisting fire and releasing no harmful gas. With good heat preservation to the steels, buildings made of AAC bricks can only be destroyed by surface when they are on fire.  


(2). Cutting Machine Simple Introduction
The aac block brick machine cutting machine is developed based on the traditional cutting machine. It mainly refers to the WIHA technology. Its reducer and control elements are of domestic or international well-known brands, thus ensuring the stability of the machine.
Features: 
1). The aac block brick cutting machine utilizes the cylinder to tension the steel wire.Coupled with the frame swinging, the service life of the steel wire is greatly prolonged, and the product accuracy has been greatly improved as well.
2). With the mobile cutting table, the green brick placing and cross-cutting are accomplished at the same position. When the adobe moves downward to the next position, both vertical and horizontal cutting can be completed.
3). As the new chain-type cutting machine, it features high automation, convenient operation, accurate cutting, and short cutting period. With this machine, the production cycle will be greatly shortened and the labor productivity will be significantly improved. 


(3).Hydraulic Mould Crane
   This hydraulic mould crane is the main corollary equipment in the aerated concrete production. It allows the bricks together with the mould to be placed on the concrete cutting machine for die sinking or demolding. The bricks will be cut by the concrete cutting machine. Meanwhile, the hydraulic mould crane will recombine and clean the concrete mould, bottom plate. Then, it will brush the stripping oil for re-pouring.


(4). Slurry Making Machine
With the slurry making machine, you can crush and mix the coal ash into the paste type after you have added water.
 

(5).Autoclaved Aerated AAC Block Brick Macine Raw material proportion (sand and fly ash) 
 
  
(6).Other Corollary Equipment
Autoclave for AAC Block Brick Machine
Material storage silo
Cement silo
 

 
 
Please contact us to get more information about the AAC block machine production line.↓↓↓
 

PT100 Temperature Control

SKYELEC Heater Rod Thermostats are suitable for use with Single Phase to control heating in electroplating baths.They are equipped with a 1.6 metre supply cord and standard red cap terminal casing.

The temperature control probe is suitable for automatic control of a pre-set value in the process media and are suitable for heaters up to 2.3 kw single phase. For higher loads, or three phase heaters an additional contactor should be used.

The probes construction makes it ideally suited for etch, pickle and plating solutions. Its robust construction and chemical resistance ensures a long service life. To set the rod thermostat, unscrew the red cover which provides access to the temperature setting control knob. Turn until the desired temperature is opposite the arrow.

Suitable for use with single phase to control heating of electroplating baths and similar solutions.

Comes complete with heavy duty terminal box and adjustable mounting blocks ready for connection.

Available in: Stainless steel, Titanium, Mild Steel or PTFE.

Alternative lengths are available to order.

The units incorporate an integral 25 amp rated thermostat unit housed with a chemically resistant, PVC coated steel terminal box, complete with quick fix brackets.

The thermostat opens on a rising temperature. Range: 25°C to 100°C. They are suitable for up to 6 kw heaters on a single phase supply. For higher loads or a three phase supply an additional contactor should be used.

The control knob is situated outside the PVC coated terminal box.

PT100 Temperature Control, Heater Rod Thermostats, Electroplating Temperature Control

Guangzhou Quanxu Technology Co Ltd , https://www.silicamattingagent.com