Easy Operated Digital Kinematic and Dynamic Viscosity Testing Equipment

Model NO.: TPV-8 / VST-8

Viscometer Reproducibility: Â±0.2%

Viscometer Rotor Number: -

Viscometer Rotor Speed: -

Viscometer Rotor Specifications: -

Condition: New Condition

Function: Test Viscosity of Oil

Application: Transformer Oil,Lube Oil,Diesel Oil,Hydraulic Oil.

Comply: ASTM D445, IP71, GB265-88, GB1814 etc.

Trademark: TOP

Transport Package: Standard Export Wooden Case Per Set

Specification: SGS, CE, ISO

Origin: Chongqing, China

HS Code: 90278000

Digital kinematic and dynamic viscosity testing equipment
Â
Â
Application
TPV-8 / VST-8 kinematic viscosity tester, applicable to GB265-88, GB1814, ASTM D445, IP71 and other determining methods, adopts precise digital temperature controller to control temperature, with advantage of digital display, high accuracy of temperature control, time-reckoning via digital stopwatch and uniform temperature of homoeothermic waterbath. It not only can be installed with four viscometers for testing simultaneously, but also can be a high-viscosity homoeothermic waterbath for other testing.Â

Features
1. Adopts imported precise digital temperature controller to control temperature of bathtub and highlighted digital stopwatch for timing, easy to operate.
2. Equipped with ten-liter homoeothermic bathtub with advantages of uniform temperature and effective temperature control.
3. Equipped with stainless steel heater and components, anti-corrosion and durable; and employed with annular typed daylight lamp for lighting, easy to observe.Â
4. TPV-8, with four viscometer installing holes, can test four types of oil for testing simultaneously.
5. Capillarimeter clutch is three-point vertical type, with advantage of flexible and convenient operation and reliable grasp.

Performance Standards	GB265-88 ,GB1814,ASTM D445,IP71, etc.
Capillary Viscometer	Conform to SH/T0173-92 Technical Conditions of Glass Capillary Viscometer Conform to JJG155 Verification Regulation of Routine Capillary Viscometer
Method of Display	Precise digital temperature controllerÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Highlighted digital stopwatch calculagraph
Temperature Control Range	Arbitrary setting between room temperature and 150ÂºCÂ Â Â Â Â Â Â Â Â Â Â Â
Testing Range	Kinematic viscosity:0.5~20000mm2/s Kinetic viscosity:0.3~40000mPa.s
Temperature Control Accuracy	Â±0.1ÂºC
Timing Accuracy	Â±0.1S
Timing Range	0.1S-999.9S
Homoeothermic Bathtub	300Ã—300mm double layer
Temperature Test Component	Precise imported platinum electric resistance
Stirring Speed	1520Rounds/Min
Highest Power	1800WÂ
Sample Quantity	4 pieces
Working Environment	Ambient temperature: 15--35ÂºCÂ Â Â Ambient Humidity: <85%
Power Supply	220V ACÂ±10%; 50HzÂ±1Hz
Dimension(largest)	220190500(LWH)
Weight	12Kg

ForÂ moreÂ information,Â pleaseÂ don'tÂ hesitateÂ toÂ contact me.
Â
Company Introduction
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers.Â We consists of departments respectively for technological development, machinery manufacture, instrument manufacture, quality control etc. On basis of mature development and manufacture technology and highly qualified production management team, the products own high quality, easy operation, excellent performance and lone service life.

TOP Oil PurifiersÂ are widespread in the fields of electric power, petrifaction, mineral, shipbuilding, steel construction, bridge, automobile and railway, playing a great role in reducing energy consumption for clients as well as environmental pollution. We provides you with reliable oil purifiers such as transformer oil purifier, turbine oil purification machine, hydraulic oil purifier, lubricating oil filtration machine, fuel oil restoration, oil and water separator, oil regeneration equipment, waste oil recycling equipment etc.

TOP TestersÂ works on the development, production, market, technical and after-sale service for petrochemical analyzers, transformer substation electrical testing equipment and circuit detecting equipment. Main products are water content testers, surface/interfacial tension testers, flash point testers, kinematic viscosity testers, oil acidity testers, insulation oil dielectric strength testers, transformer characteristics testers, relay protection testers, high voltage testing equipment etc.
Â
HonestÂ TeamÂ -Â TOPÂ alwaysÂ honestlyÂ treatÂ youÂ andÂ keepÂ faithÂ toÂ makeÂ youÂ satisfiedÂ withÂ everyÂ cooperationÂ withÂ us.
SincereÂ CommunicationÂ -Â TOPÂ sincerelyÂ communicateÂ withÂ youÂ toÂ guaranteeÂ theÂ providedÂ products toÂ beÂ yourÂ idealÂ ones.
ReliableÂ QualityÂ -TOP ownÂ highÂ qualityÂ andÂ highÂ performanceÂ forÂ everyÂ TOPÂ product isÂ underÂ strictÂ qualityÂ controlÂ andÂ testing.
ServiceÂ CommitmentÂ -Â TOPÂ bringÂ youÂ prompt,Â considerateÂ andÂ professionalÂ aftersaleÂ serviceÂ andÂ technicalÂ support,Â andÂ exploreÂ technologyÂ futureÂ together.

Key words: oil viscosity tester, density tester, kinematic viscosity tester, viscosity test equipment, viscosity analyzer, petroleum products density tester, oil density tester, densimeter, viscometer, viscosity meter, viscosity tester, viscosity testing equipment, kinematic viscometer, viscosity measurement, measuring instruments, measuring device, test equipment, density measuring devices, automatic density and viscosity tester, oil viscometer, density meters, oil density meter, liquid density meter, viscosity measuring devices, concentration measuring instruments, liquid viscosity test, oil viscosity test kit, dynamic viscosity test equipment, cooking oil viscosity, kinematic viscosity measurement, oil viscosity/density testing equipment /instrument, digital viscosity testing equipment, liquid density meter, transformer oil density, dynamic viscosity testing equipment for lubricant, viscosity calculator, transformer oil viscosity testing instrument ...

Metal Injection Molding Service

Metal Injection Molding (MIM) service is a new metal processing technology that combines metal powder with a binder to form a mixture that is injected and molded into a green compact. The MIM service process includes the following steps:

Preparation of metal powder: The required metal powder is mixed with a binder such as a thermoplastic or thermosetting plastic by ball milling or other methods to form a homogeneous mixture.
Injection molding: The mixture is placed in an injection molding machine, heated to melting, and injected into a mold to form a green compact of the desired shape.
Sintering: The green compact is subjected to high-temperature sintering to remove the binder and densify the metal powder.
Finishing: The sintered compact is finished to obtain the required dimensions and accuracy of the product.

The MIM service process is characterized by high precision, high efficiency, and ability to process complex shapes, and is widely used in the electronics, machinery, automotive, and aerospace industries.

Metal Molding,Injection Mold Design,Metal Injection Molding Process,Precision Injection Molding

Dongguan ganzoo prototype manufacture co.,ltd , https://www.dgpmsheetmetal.com