"Transformer Intelligent Terminal Data Collector" integrates electricity load, power supply voltage, transformer temperature rise, and transformer fault detection. It is equivalent to installing an "electronic eye" for the transformer. Various data are transmitted to the monitoring center through wireless network and optical cable. The monitoring center can perform real-time monitoring of any transformer equipped with an "electronic eye." Transformer has "electronic eyes" will improve the user's power quality, prevent low voltage and over-voltage, to prevent users from power failure due to transformer overload burnout; at the same time, it can also reduce the power supply department's operation and management of the distribution transformer workload, but also To arrange scientific and orderly power plans for the current shortage of power supply.
According to Yu Junbo, the person in charge of the production technology department of Fenghua Power Supply Bureau, the “transformer intelligent terminal data collector†is actually a basic data collector for the smart grid, and the transformer has “electronic eyes†to lay the foundation for the future comprehensive construction of intelligent distribution network. The foundation. Yan Junbo said: "The most important function of the smart grid is to realize the uninterrupted power supply of the users. Because of the distribution of the power grid, when a regional power grid fails and power failure occurs, the "electronic eye" can know the power outage information for the first time, and then through other Means to achieve intelligent network dispatch, as far as possible to minimize the scope of power outages, but also the first time to repair faulty transformers."
Zhai Junbo introduced that since the second half of last year, Fenghua Power Supply Bureau has installed 1,841 transformers and smart terminal data collectors in urban and rural public distribution transformers in the city. All transformers have been installed before the Spring Festival. After nearly six months of trial operation, the transformer real-time monitoring system The normal operation is in full compliance with the technical standards of Zhejiang Electric Power Company. He said that after the completion of this real-time monitoring data system for distribution transformers, Fenghua will play a significant role in arranging orderly electricity use more scientifically and reasonably this year.
1 Ton Pedestrian Type Electric Stacker
Electric Stacker is an industrial device for loading and lifting pallets on a shelf at high level. As an ideal choice to operate in narrow space of warehouse, it can be widely used in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries, as well as ports, railways, freight yards, warehouses.
1. Mast which can provide wide field of vision
The hydraulic cylinder is located at the right-middle side of the stacker, thus
providing a wider field of vision for the operator.
2. Double speed switch
The speed of this electric stacker can be freely switched between normal speed
and slow speed. The operators can choose slow speed to realize slow moving of the
stacker. This is especially suitable for new operators who are not familiar
with the operation of this equipment.
3. Lateral vertical moving
The stacker can move without pulling the handle. By pressing down the straight
moving button, the stacker can move slowly. This is suitable for working in
narrow aisles and other limited spaces.
4. Adjustable balance and supporting wheel
The adjustable balance wheel features strong stability, so that the operation
can be more stable, safer and more reliable.
5. Solid channel steel mast
Compared with the bending finished iron metal mast, the channel steel mast is
more solid and durable, more stable and safer.
6. Intelligent sleep mode
When the stacker is not in use for long time, the intelligent sleep mode will
be automatically initiate to save battery power and cost.
7. Handle of the best one-step length
The long operating handle adopts ergonomic design. The max ground clearance is
1305mm and the min ground clearance is 715mm, so that it quite easy to use.
During normal operation, the operators should be one-step away from the
stacker, so that their feet will not get caught by the wheel, thus ensuring
safety of the operators.
8. Split type mast
The fabricated connection of the mast and stacker frame can realize easy installation
and changing of the mast as necessary. The working device and moving device are
easily disassembled and changed.
9. Beautiful and tiny appearance
The base design: the front base is 600mm in length so that it is flexible and
suitable for working in narrow channels. It is the ideal choice for trans-floor
working.
Full electric stacker,Semi electric stacker,All terrain electric stacker,Ameise electric stacker,Apollo electric stacker
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com