No matter what kind of vehicle you drive, we must always focus on safety. Most of the mobile stage cars use diesel fuel, and there are many engine model configurations. This requires selection based on their own needs. Nowadays, mobile stage cars are basically more groups that perform everywhere, and when a show is confirmed, all kinds of people are needed. In order to avoid misunderstandings in the case of a lot of miscellaneous people, when a mobile stage car is used, it should be operated and directed by an operator who specializes in related matters and professionalism. Under such arrangements, it is possible to avoid the potential safety hazards caused by the improper handling of mobile stage vehicles by irrelevant and non-professional personnel.
In addition to professional command and control personnel, the mobile stage car actually pays attention to some situations when it comes time to refuel the stage car . Although everyone knows what model their vehicle is, it is not necessarily clear to the staff at the gas station that multiple eyes are necessary for the normal use of the vehicle. The case of the staff adding gasoline to the diesel car was not without it. Then, how should the problem be resolved when the wrong oil is added?
If the mobile stage car is filled with the wrong fuel, and before the timely discovery, the stage car is not started, then there is still the opportunity to extract the gasoline that has been filled in, and then clean up the tank after Re-inject new diesel into it. If it is not found that the wrong oil is added, the stage car will be driven to a certain distance. All that needs to be done is to immediately call the repair shop and let the person come over to repair the trailer. Everyone makes mistakes, so be careful when driving in your daily car.
This classification mainly includes the aluminum or zinc alloy die casting parts using in LED Streetlight area.
In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4.
Process Technology: High pressure die casting,NC machining,Shot Blasting
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: LED Light
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo
Die Casting LED Streetlight Components,Aluminum Casting Parts for LED Streetlight,Zinc Casting Parts for LED Streetlight
NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.casting-part.com