Single-stage safety sliding line structure and characteristics
1. Current collector: The main device for picking up electric energy from the collecting side of the sliding line system. It directly conducts electric energy to the electric appliance through the sliding contact between the collecting brush and the guide rail, thereby realizing the mobile power supply of the system. The current collector is composed of a mechanical structure tensioning device and a collecting brush that is in direct sliding contact with the guide rail.
2, inspection section: mainly used for sliding line maintenance.
3, temperature compensation section: also known as thermal expansion compensation section, used to compensate for changes in wire length caused by temperature changes.
4. Lifting rack: The device used to fix the sliding contact line. Its material is polymethyl hydrazine. It has high hardness, corrosion resistance and anti-aging characteristics. It can support the suspension sliding wire and can be fixed in horizontal and vertical directions. Slide the wire. At the same time, the vertical direction can be finely adjusted to ensure the tight connection between the safety sliding line and the current collector. When the lifting clip is fixed to the safety sliding line, it can be easily installed by simply fastening the lifting lugs on both sides of the sheath, without any tools, and the installation is very convenient.
5, the end sheath: to protect the safety of the sliding line, using special PVC raw materials, processed with special formula. It is made of stainless steel exquisite mold and special process. It has stable size, small tolerance range, good quality, high smoothness and toughness. It has the advantages of temperature resistance, corrosion resistance, waterproof, dustproof, anti-aging, wind erosion resistance and long service life.
6. Fixing frame: A bracket for fixing and stabilizing the sliding line.
New Type
Product Description
Production structure have 3 series: Solid fin(big fin) with slant insert tube , single fin(Small fin) with parallel tube expansion and single fin with slant insert tube
Material Composition:
Aluminum Tube OD:: Φ8mm Wall Thickness: 0.508~1.0mm
Aluminum foil thickness: 0.13-0.2mm
Process: Fin stamping and tube bending→tube end press and twist→fins and tube assembly→ leakage test→keeping pressure→packing
|
Raw material
|
(1)Al tube:OD 8mm, wall thickness:0.508-1.0mm
|
|
(2)Al foil thickness: 0.13-0.2mm
|
|
Application
|
refrigeration parts
|
|
Structure
|
(1)pull and expanded type
|
|
|
(2)slant inserting type
|
|
Key process
|
Fin stamping and tube bending→tube end press and twist→fins and tube assembly→ leakage test→keeping pressure→packing
|
The structure have the Al tube expation and Al tube insert with small fin and big fin
Specially refrigeration Al tube and Al. foil fin, pure surface, light weight.
High quality inner clearance, high capability of heat-exchange.
High performance corrosion resistant.
Apply to the refrigeration R134a, R600a.
Production surface can be painted with blue or black painting
Solid Fin Evaporator:
Small fin with tube expansion
Small fin with slant insert tube
Fin evaporator moudle with heater
Our company mainly produces products for:Fin Evaporator.Fin Type Condenser.Capillary Tube.Aluminum Coolant Reservoir.Plate Reinforcement Parts.Stamped Parts.Aluminum Tube.Instrument Testing Equipment.
If you have any interest, pls feel free to contact with us at any time. We can supply copper evaporator and copper condensers according to your drawings or samples.
new type
Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.ycevaporator.com