Taigang's 1.5 million tons stainless steel steelmaking project conversion foundation was successfully poured once

The 1# and 2# converter foundations constructed by the 13th Metallurgical Company were successfully cooperated and closely coordinated by Party A and the supervision company. After the mold was removed, the appearance of the converter base was fascinating and glamorous, and it was highly appreciated by Party A.

The converter foundation is a large-volume concrete casting with a single base volume of 910 cubic meters. Since the foundation construction of the converter, the leaders of the project department have paid special attention to the process control of their quality. The chief engineer and quality supervisor in charge of the civil engineering personally participated in the technical meeting of the four companies, and carefully checked the arrangement of the steel bars on the base of the converter and the position and deviation of the embedded bolts. , the flatness and verticality of the template, and special requirements must use a new black wood template. When pouring concrete, the four companies carefully constructed to ensure the quality of the project and demonstrated the exquisite construction level of the 13th Metallurgical Company.

At present, other furnace foundations are used as a model to carry out construction in an orderly and orderly manner.

PVC Rapid Roll Up Door

Fast PVC rolling door can be designed according to the needs of customers. These doors can be used in firms, inside or outside. The fact that it is not used on a fixed area provides a flexible usage possibility. According to the needs of the firms, they can easily choose PVC rolling doors in the building areas. In addition, it can be used in exterior areas and provides a wide usage area. Fast PVC rolling door can be produced by coating fabric. The different colors of the fabric can be helpful in separating parts of the business. The function of the tarps is not only aesthetic, but also contributes to the protection of the door system against impacts. Since the impacts of the fabric do not come into direct contact with the door surface, it is inevitable that the door will be protected and long-lasting. The fabric can be a very important material so that the door receives as little damage as possible from impacts. Of course the fabric is resistant to a certain level of impact and there is also the possibility of damaging the fabric. You can contact our company for repair of PVC Fabric Roll Up Door. Standard: 0.7 m/s It can be increased up to Maximum opening: 1.5 m/s Maximum closing: 0.4 m/s Aluminum wind rail: 35km/h Brands: Mehlar, Heytex, Sioline Thickness of normal fabric: 1 mm Thickness of transparent fabric: 2mm Manually Operated Optional: It can be operated with UPS in case of power eut Sides struts, lower parts, wind rails, and drums are aluminum. Sides of the upper parts are coated with galvanize. Winding box is 1311 galvanized. Reducer box Fast PVC door motor set (Temporiti-ITALY) DH-14 Door controller Pepperl fuchs safety photocell Rovioly Limit system

PVC Rapid Roll Up Door, high speed rolling doors, PVC fast rolling doors

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafd.com