The composition of the sprinkler and the introduction of each system

★ Composition of sprinkler and introduction of each system ★

The composition of the sprinkler and the introduction of each system
Usually a sprinkler consists of the following components: special vehicle chassis, tanks, piping systems, and operating systems. The following is a brief description of these four parts.
First, special vehicle chassis: generally use Dongfeng, Jiefang, Jianghuai and other types of chassis. Currently widely used are "Dongfeng bully sprinkler, Dongfeng Dolikka sprinkler, Dongfeng Sanpingcha sprinkler, Dongfeng 140 sprinkler (long head), Dongfeng 145 sprinkler (flathead), Dongfeng 153 sprinkler (Flat), Dongfeng 1208 sprinkler (rear double bridge).
Second, the tank production: Our company uses automatic assembly line tank production process is divided into: cutting, automatic welding puzzle, head spin spinning molding, tank rolling and other domestic advanced production technology. Tank materials are mostly made of high-quality carbon steel plates. In case of special use, it can also use imported Korean 304 stainless steel according to customer's needs. The volume of the tank can be "4 cubic, 5 cubic, 6 cubic, 8 cubic, 10 cubic, 13 cubic, 15 cubic" and so on.
Third, the pipeline system consists of "pipes, valves, filtration devices, outlets (before the after the spill, side spray; high side shower; after the work platform, with green sprinkler gun).
Fourth, the operating system: mainly driven by the engine gearbox, gearbox installed on the PTO driven sprinkler pumps, sprinkler pumps generate power, the liquid inside the tank through the pipe network to spray out. Working range: Self-priming height: ≤7m, Sprinkling width: ≥14m, Maximum range: ≥28m; Adjustable into a column with a range of ≥28m; It can also be adjusted to a mist with a range of ≥15m.
Optional configuration: It can be equipped with sprinkling discs, drug pumps, anti-corrosion rust inside the tank, multi-directional inlet and outlet connections, solenoid valves, pneumatic valves and other advanced facilities to meet the needs of different users.

24-hour car hotline manager Li

Tube Sheet

Tube sheet are usually made of a round flat plate with holes drilled into the plate to accommodate tubes in the exact location and pattern relative to each other. The tube sheet is used to support and isolate the tubes in the Shell And Tube Heat Exchanger.

A tube sheet is a plate used to support a tube in a shell and tube heat exchanger. The tubes are aligned in a parallel manner and are supported and held in place by the tube plate. A tube sheet is a round plate with holes in it so that the tube can fit through the opening. Tubes are usually made of round, flat metal sheets. Drill holes for pipe ends in precise locations and patterns relative to each other. The tube plate is made of the same range of materials as the pipe.

These are usually made of mild steel and vary in thickness according to fluid pressure. Depending on the final application (petrochemical, nuclear, oil and gas, etc.), the tubes can be clad in stainless steel or other superalloys, or even made entirely of stainless steel or superalloys.

Tube Sheet,Boiler Tube Sheet,Floating Tubesheet,Exchanger Tube Sheet

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com