Wood hammer mill/wood crusher machine can crush all kinds of biomass waste , such as wood chips, wood shavings, straw, stalk,e.c.t also can crush animal feed materials, such as corn, weeds, soybean, maize, cereal. After crushed, will get smaller than 2mm powder, Now it is mainly used in animal feed factory, wood factory, Chemical industry and so on.
             There is one screener installed at the wood chips crusher bottom, the crushed powder will outlet from screener hole, generally if raw humidity smaller than 20% , we will install 2-4mm screener hole , then will outlet smaller than 4mm dimension powder. If raw humidity is very large, we will install 10-20mm hole screener or even no screener.
             Wood hammer mill/wood crusher machine key spare parts hammers and screener are made by our CNC systems, through high technical heat treatment , standing out from other suppliers is that we could ensure high precision and high quality.
             Wood hammer mill has two screener at each side of crusher and can outlet powder from large scope screener hole , which makes high capcaity production, also there is opending door switch installed at two sides of grinder , which makes inspecting and repairing process very easily .
             Wood hammer mill works connect with air fan and cyclone, for biomass materials, the crushed powder will go to cyclone and outlet from cyclone bottom, for fertilizer materials or animal feed materials , power will outlet directly from crusher bottom. Also it can work connect with bags filter ,which is used to clean dust.
Main technical parameter of wood hammer mill
Model |
Power(kw) |
Capacity(t/h) |
GXP65*27 |
22 |
0.5-1 |
GXP65*55 |
37-55 |
1-2 |
GXP65*75 |
55-75 |
1.5-2.5 |
GXP65*100 |
90 |
2.5-3.5 |
GXP130*55 |
160 |
3-4 |
GXP130*100 |
220 |
3.5-5 |
GXPSS-80x100 |
110X2 |
4-5 |
GXPSS-80x100 |
132X2 |
5-6 |
1.The classification:
The classification of fiber glass purification tower : Wet Exhaust Gas Cleaning and Dry Exhaust Gas Scrubber.Wet Exhaust Gas Cleaning divided into : packed tower, scrubber tower, desulfurizing tower,Swirl plate tower ,bubble cap tower,stripping tower,absorbing tower; Dry Exhaust Gas Scrubber divided into: activated carbon adsorption tower ,SDG dry acid waste gas adsorption tower . It apply to dispose harmful gas: sulfuric acid mist (H2SO4), hydrogen chloride (HCL) gas and hydrogen (HF) gas, chromium acid (CrO3), hydrogen gas (HCN), hydrogen sulfide (H2S), ammonia (NH3), nitrogen oxide (NOx), organic acid, benzene e,etc. The adopted way is different according to different waste gas.It is more better that using dry adsorption way for organic waste gas, and using wet purification or wet+dry adsorption way for Inorganic acid .
2.Introduction of two main type
A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor.
B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.
3.Application:
Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
Alkali gas: NAOH, KOH, NHS etc.
Organic gas: benzenes, alcohols, phenols.
We used different absorption solvent for dealing with different harmful gas.
4.Attention:
1. This purification tower should be installed on anti corrosion basis which is higher 100mm than ground. Pump with acid resistance should be on another anti corrosion basis.
2. This equipment should be installed indoor, in order to prevent cold weather from effecting on equipment and absorption solvent.
3. If there is no PH controlling system, PH of acid or alkali solvent should be checked regularly, and consistency should be adjusted at any time.
4. Spray-head and filling material should be checked regularly, in order to avoid plugging, any problems should be solved immediately.
5.Technical parameter:
Name
Air flow
Relative pump
Relative fan
Quantity of solvent
Weight of column body and total
absorption solvent
Model
m3/h
Pump
Motor
Fan
Motor
KG
KG
kw
kw
1
2000-2600
40FSB-15L
2.2
4-72 5A
1.2
840
1280
2
5000-6000
40FSB-20L
3
4-72 5A
2.2
1820
2420
3
8000-10000
50FSB-25L
4
4-72 6A
4
3200
3900
4
14000-15000
65FSB-32L
5.5
4-72 6C
7.5
4200
5000
5
18000-20000
80FSB-20L
5.5
4-72 7C
11
5400
6400
6
24000-26000
100FSB-32L
5.5
4-72 8C
15
6600
7800
7
30000-35000
100FSB-32
15
4-72 10C
18.5
7200
8200
8
40000-45000
1000FSB-32
15
4-72 10C
30
8100
12000
9
50000-60000
1000FSB-32
15
4-72 12C
37
10048
15000
Waste Gas Treatment Equipment.
Fdg Absorption Equipment, Waste Gas Equipment, Absorption Tower
Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://wwww.chinaxingbangheavyindustry.com