75/180mm Single Screw and Twin Screw Extruder

Model NO.: TSC-75/180
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Non-Computerized
Diameter: Tsb-75: 71mm Se-180:180mm
L/D: Tsb-75: 24~48 Se-180:7~20
Screw Speed: Tsb-75: 500r/Min Se-180:85r/Min
Power: Tsb-75: 110kw Se-180:45~55kw
Capacity: 400~800kg/H
Trademark: CHUANGBO
Transport Package: Wooden Cases
Specification: CE
Origin: Nangjing, Jiangsu
HS Code: 8477900000
Model NO.: TSC-75/180
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Non-Computerized
Diameter: Tsb-75: 71mm Se-180:180mm
L/D: Tsb-75: 24~48 Se-180:7~20
Screw Speed: Tsb-75: 500r/Min Se-180:85r/Min
Power: Tsb-75: 110kw Se-180:45~55kw
Capacity: 400~800kg/H
Trademark: CHUANGBO
Transport Package: Wooden Cases
Specification: CE
Origin: Nangjing, Jiangsu
HS Code: 8477900000
TSC-75/180 TWO STAGE EXTRUDER
 
TSC-75/180 two-stage screw extruder has been greatly optimized according to the practical situation in the production.
1. The extrusion equipment comes with an automatic calculating and mixing system for the large-scale production of PVC material. Thus the labor cost and human mistakes are largely reduced.
2. A loss in weight (LIW) type automatic dosing system has been designed to meet the requirements of the processing of cross-linked materials. So every ingredient, including some low-content processing agents and cross-linking agents will be accurately added.
3. In our two-stage screw extrusion facility, the well designed barrel of the twin screw extruder can be adjusted in terms of length/diameter ratio (L/D) from 7 to 48, according to the properties of the processing materials. The barrel for the material feeding, venting, vacuuming, and extruding can be assembled easily just like building blocks. In addition, the screws of our two-stage screw extruder come with different shapes so that you can choose the right one for your production.
 
The models in the form below belong to the same series, while the parameters of the TSC-75/180 two-stage screw extruder are highlighted. Custom products are available according to your requirements such as production capacity and materials.
 
 
Type
Diameter
(mm)
 L/D
Screw Speed
(r/min)
Power
(kw)
Capacity
(kg/h)
TSC-52/120 TSB-52 51.4 24~48 500 45 100~300
SE-120 120 7~20 85 30~37
TSC-52/150 TSH-52 51.4 24~48 600 90 200~500
SE-150 150 7~20 85 37~45
TSC-65/150 TSB-65 62.4 24~48 500 75 200~500
SE-150 150 7~20 85 37~45
TSC-65/180 TSH-65 62.4 24~48 600 160 400~800
SE-180 180 7~20 85 45~55
TSC-75/180 TSB-75 71 24~48 500 110 400~800
SE-180 180 7~20 85 45~55
TSC-75/200 TSH-75 71 24~48 600 250 700~1500
SE-200 200 7~20 85 55~75
TSC-95/220 TSB-95 93 24~48 400 200~250 800~1600
SE-220 220 7~20 85 75~90
 
TSC-75/180 TWO STAGE EXTRUDER
 
TSC-75/180 two-stage screw extruder has been greatly optimized according to the practical situation in the production.
1. The extrusion equipment comes with an automatic calculating and mixing system for the large-scale production of PVC material. Thus the labor cost and human mistakes are largely reduced.
2. A loss in weight (LIW) type automatic dosing system has been designed to meet the requirements of the processing of cross-linked materials. So every ingredient, including some low-content processing agents and cross-linking agents will be accurately added.
3. In our two-stage screw extrusion facility, the well designed barrel of the twin screw extruder can be adjusted in terms of length/diameter ratio (L/D) from 7 to 48, according to the properties of the processing materials. The barrel for the material feeding, venting, vacuuming, and extruding can be assembled easily just like building blocks. In addition, the screws of our two-stage screw extruder come with different shapes so that you can choose the right one for your production.
 
The models in the form below belong to the same series, while the parameters of the TSC-75/180 two-stage screw extruder are highlighted. Custom products are available according to your requirements such as production capacity and materials.
 
 
Type
Diameter
(mm)
 L/D
Screw Speed
(r/min)
Power
(kw)
Capacity
(kg/h)
TSC-52/120 TSB-52 51.4 24~48 500 45 100~300
SE-120 120 7~20 85 30~37
TSC-52/150 TSH-52 51.4 24~48 600 90 200~500
SE-150 150 7~20 85 37~45
TSC-65/150 TSB-65 62.4 24~48 500 75 200~500
SE-150 150 7~20 85 37~45
TSC-65/180 TSH-65 62.4 24~48 600 160 400~800
SE-180 180 7~20 85 45~55
TSC-75/180 TSB-75 71 24~48 500 110 400~800
SE-180 180 7~20 85 45~55
TSC-75/200 TSH-75 71 24~48 600 250 700~1500
SE-200 200 7~20 85 55~75
TSC-95/220 TSB-95 93 24~48 400 200~250 800~1600
SE-220 220 7~20 85 75~90
 

Blowing machine

Blowing machine, Full Auto Blow Moulding Machine (20), China Blowing machine

Taizhou Huangyan YouGo Mould & Plastic Co., Ltd , http://www.plastic-moulds.com