Belt Splicing Preparation Cord Stripper

Why Steel Cord Belts Need Splicing

1. Severe wear and delamination on steel cord belts.
2. Conveyor belt joints require proper splicing for optimal performance.

The cord stripper is designed to remove steel cords from conveyor belts that are to be spliced. This process can be performed in a vulcanizing shop or on-site. It ensures efficient preparation for splicing, which is essential for maintaining the integrity and longevity of the conveyor belt system.

Cable pitches: 10~25mm
Cable diameter: φ4.9 ~ φ13.2mm
Rubber cover on the carrying side: ≤25mm
Rubber cover on the running side: ≤12mm
Total belt thickness: ≤43mm

Key Features

-- No need to turn the belt, as the rubber cover on both sides is removed in a single operation.
-- The remaining rubber thickness can be adjusted as needed, ensuring better vulcanization results.
-- Easy to use, saving time and reducing labor intensity.









Upper and Lower Knives

Upper and Lower Knives	Diameter of Steel Cord
R3	ø4.5~5
R4	ø6~7
R4.5	ø7.5~8.1
R5	ø8.6~9.1
R5.5	ø9.7
R6	ø10.6~13.2

Factory Since 1996

1) Over 25 years of experience in producing and developing conveyor belt accessories, Debon Technology has become one of the top 10 manufacturers in China.

 

2) Exported since 2009, with products shipped to over 45 countries worldwide, receiving consistent orders from satisfied customers.

 

3) Recognized as an Alibaba 10 million e-businessman since 2013, reflecting strong online presence and customer trust.

 

4) With extensive experience, mature production processes, and rigorous quality control, we guarantee high-quality and consistent products.

Hollow Anchor Bar

Full threaded steel self drilling rock bolt / Hollow anchor bar / Anchor rods

The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling, anchoring and grouting in a single operation. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It`s irreplaceable in narrow construction environment. Hollow anchor bar is made of seamless tube with high strength.

Advantages and Characteristics as below:

1. No casings required, because anchor bars can be drilled into loose soils without needing casings to support the boreholes.

2. Fast drilling and installation, because drilling, installation and grouting are in a single operation.

3. Both rope threads and trapezoid threads are robust and ideal for rotary-percussive drilling and ensuring a high level of bondwith the borehole gout.

4. The hollow core not only serves for flushing during drilling, but also for grouting after drilling.

5. Continuous threads ensure the bars can be cut and coupled at any point, or extended.

6. Different anchor bits are available for different ground conditions.

Hollow Anchor Rod,Grouting Anchor Rod,Hollow Anchor Bar,Hollow Anchor Bolt

Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhousteel.com