Product Specifications
Weight: 30-31KG
Overall Dimensions: 390mm × 350mm × 235mm
Power: 160-300W
Display Mode: LCD Liquid Crystal Display Screen
Cutting Length: 1mm - 9999mm
Cutting Tolerance: ≤ 0.002 × L (L = Cutting Length)
Stripping Length: Head 0 - 35mm, Tail 0 - 15mm
Cutting Cross-sectional Area of Wire Core: (508C 0.2-2.5 mm²; 508-SD 0.1-4.5 mm²) and (508E 0.1-8 mm²; 508-JE 0.1-10 mm²)
Maximum Diameter of Conduit Pipe: φ11
Middle-stripping: 10 places of stripping
Material of Knife: High-quality Tungsten Steel
| Stripping Speed: | 3000 - 80000 pcs/h |
| Mode of Driving: | Mode C - Two-wheeled Drive |
| Mode SD/SDB/E/JE - Four-wheeled Drive | |
| Adjusting Speed: | 0 (Slowest) to 9 (Fastest) |
Operating Principle
The wire is conveyed through the wire-inlet rollers and the wire-outlet rollers, and the cutting and stripping process is completed by the knife rack assembly, all controlled by microcomputer technology.
Main Function of Each Part
- Wire-inlet Rollers: For conveying wires and stripping wire heads.
- Wire-outlet Rollers: For conveying wires and stripping wire tails.
- Knife Rack Assembly: For wire cutting, head stripping, and tail stripping.
- Wire-inlet Gap Adjusting Rollers: For adjusting the wire-inlet gap; turn down to decrease and up to increase.
- Wire-outlet Gap Adjusting Rollers: For adjusting the wire-outlet gap; turn up to increase and down to decrease.
- Conduit Pipe Assembly: Ensures the wire moves smoothly and straight, preventing misalignment during the transfer from the inlet to the knife assembly.
Key Points for Operation
- Insert the wire into the wire inlet, pass it through the wire-inlet rollers and conduit pipe, then onto the knife edge.
- Adjust the wire-inlet gap using the wire-inlet gap adjusting rollers to ensure it is less than the outer diameter of the wire to be stripped, ensuring proper stripping of the insulation.
- Adjust the wire-outlet gap with the wire-outlet gap adjusting rollers, making sure it is less than the outer diameter of the wire. Adjust the wire breakage indicator light between on and off states, turning it half a circle. If the machine still stops due to wire knots, slightly reduce the gap.
Bimetallic barrel refers to bimetallic screw and barrel, mainly used for processing engineering plastics, fluoroplastics, polysulfone, PPO special types of plastics, etc.
After more than 20 years of continuous development, Zhejiang jinteng
Machinery Manufacturing Co., Ltd. has become a famous production base
and supporting center of screw and barrel for plastic machinery in
China.
Bimetallic Screw & Barrel,Bimetallic Screw Barrel,Bimetallic Screw Barrel Material,Screw Barrel Material
Zhejiang Jinteng Machinery Manufacture Co., Ltd. , https://www.jintengmachine.com