DCI 11 engine oil selection
Dongfeng Tianlong use requirements
Correct use of good road conditions Tips and Lights Handy clutches are applied smoothly to shift gears properly, without dragging, and when coasting as far as possible. Avoid sudden braking. Engine speed cannot exceed 1,900 r/min.
After starting the engine, light load or no-load preheating should be performed. It is forbidden to idle for a long time. The engine oil pressure must not be exceeded for more than 5 minutes. The engine coolant temperature should be controlled within the normal range to avoid long-time constant speed operation (go-round period). Extinguish and glide. Before turning off, keep running at idle speed for 3 to 5 minutes. Turn off the engine when the temperature drops.
Welding work specification on the vehicle
Turn off the engine and disconnect the main power switch.
Disconnect the positive battery power cable and the negative battery power cable. Connect the positive power cable and the negative power cable as shown in the following figure.
Turn on the power switch to perform the welding operation.
Dongfeng Tianlong DFL4181A1/A2 cruise switch use
LCD display instructions
View related topics: Introduction, maintenance and maintenance of Dongfeng Tianlong series models