ZF16S181 starting gear selection
Upshift method
Other transmission starting gear selection and switching sequence
DCI11 Engine Economic Speed ​​1100 - 1500 n/min
Suggest:
1. Straight road shifting speed does not exceed 1500r/min
2. Uphill road surface shift speed is about 1800r/min
3, downhill road shift speed of about 1300r/min
The most fuel-efficient speed 1100 - 1300 n/min
Note: At 1200r/min, 8 high-end corresponding speed is about 70km/h
Yuchai, Cummins Engine Economic Speed
Good driving habits
1 Do not push the shift lever repeatedly by hand while shifting gears
Do not step on the clutch pedal. Do not put your hand on the shift lever (this prevents clutches, clutch control, and gearbox internal wear).
3 Avoid unnecessary gear changes (each shift requires a certain amount of time, when the traction is interrupted, the engine is at idle conditions, will produce additional fuel consumption, while the clutch and gearbox synchronizer have slip wear loss during shifting ).
4 The clutch pedal should be pressed to the end when shifting to protect the transmission
5 In the case of sufficient driving force, use high gear as much as possible.
6 Predictive driving Effective use of vehicle inertial driving
Find obstacles as early as possible to avoid unnecessary parking Avoid unnecessary braking or emergency speeding
7 Proper use of half-gear control - Half-gage (H or L) is pre-selected by a preselection switch on the gear lever and achieved through clutch disengagement (ZF 16-gear transmission has a tight gear ratio to ensure optimal driving Position, so the vehicle speed is in the most fuel-efficient state. The gear shift is more comfortable and reduces shift noise.
8, do not hesitate to shift the process, act decisively, quickly and accurately
Â
View related topics: Introduction, maintenance and maintenance of Dongfeng Tianlong series models