Top Quality PS Decoration Profile Extrusion Machine

Product Application
Imitation wood shower room pedals;PS imitation wood shower pedal;composite diy floor; outdoor assembly floor; PS wood bar; PS outdoor diy floor;balcony assembly floor;waterproof assembly floor;environmental PS wood floor flower boxes;PS wood outdoor furniture.
PS imitation wood materials performance far exceeds the general wood preservative,than conventional PE,  WPC in life ,mildew,weathering on both better,is a useful supplement to wood-plastic composite materials. To further accelerate the development of domestic wood-plastic composite industry and innovation. 
XQY180 Haul-off Unit
Quantity of caterpillar: 2 sets
Film-covering device: Clamped by cylinders.  Film are covered on both surface.
Haul-off motor: 1.5kw x 2 sets
Controlled by imported frequency converter-Imported brand
Effective width of caterpillar: 180mm
Haul-off speed  0.5~4.6m/min
XQG180Cutter
Power of motor: 1.5 KW
Max. Cutting width: 108mm   Max. Cutting height:120mm
Power of sucking-dust-fan: 0.75 KW
Cutting saw: Alloy steel, specially for cutting PVC profile - O.D. 400mm
Rack moved by reduction motor and knife lifting and clamping moved by pneumatic
Manual or automatic cutting type
With meter-calculating device
       
XDX180 Vacuum calibration table
Calibration tanks and basin are made of stainless steel
Table length: 3000mm
Table width: 1100mm
Distance between aluminum track: 320mm
Vacuum pump power and quantity: 5.5 KW x1. (Water should be exhausted in case of frozen)
Water pump power and quantity: 4kw x 1set
Quantity of air nozzle: 16 pcs (marked in yellow)
Quantity of water nozzle: 16 pcs (marked in blue)
Mould supporter: casting aluminum bar with T shaped slot for fixing mould tool. Supporting rack and water pipe are integrated, which is made of stainless steel tube.
Installation of air and water nozzle: Air nozzles are installed on guard plate and water nozzles are installed on supporting rack.
Electric controlling cabinet and panel with waterproof covering
With air fan device (0.75kw) for drying water on the product surface
Lifting device for calibration: calibration and haul-off are connected by lead screw bolt with deceleration motor of 0.75kw.
Fitted with a device for vertical adjustment
Fitted with a device for horizontal adjustment and can be adjusted by hand


For choosing the proper machine and saving your time, please read these bellow guides carefully
1). What kinds of plastic machinery do you need ? Or what material do you want to process?
2). What capacity do you want? (kg/h )
3). What is the max and min size of the finish products .For example, the width and thickness of sheet(mm)?
4) What is the electric device you need ? Siemens, Omron or domestic ?
5) When do you want the machine? (Times for delivery)
6) Other requirements about the machine you want.

if you are interested in this machine ,please contact me:
mob : +86 13915723896  ( or +86 13817556740 )
 
Jeremy He
  Product Application
Imitation wood shower room pedals;PS imitation wood shower pedal;composite diy floor; outdoor assembly floor; PS wood bar; PS outdoor diy floor;balcony assembly floor;waterproof assembly floor;environmental PS wood floor flower boxes;PS wood outdoor furniture.
PS imitation wood materials performance far exceeds the general wood preservative,than conventional PE,  WPC in life ,mildew,weathering on both better,is a useful supplement to wood-plastic composite materials. To further accelerate the development of domestic wood-plastic composite industry and innovation. 
XQY180 Haul-off Unit
Quantity of caterpillar: 2 sets
Film-covering device: Clamped by cylinders.  Film are covered on both surface.
Haul-off motor: 1.5kw x 2 sets
Controlled by imported frequency converter-Imported brand
Effective width of caterpillar: 180mm
Haul-off speed  0.5~4.6m/min
XQG180Cutter
Power of motor: 1.5 KW
Max. Cutting width: 108mm   Max. Cutting height:120mm
Power of sucking-dust-fan: 0.75 KW
Cutting saw: Alloy steel, specially for cutting PVC profile - O.D. 400mm
Rack moved by reduction motor and knife lifting and clamping moved by pneumatic
Manual or automatic cutting type
With meter-calculating device
       
XDX180 Vacuum calibration table
Calibration tanks and basin are made of stainless steel
Table length: 3000mm
Table width: 1100mm
Distance between aluminum track: 320mm
Vacuum pump power and quantity: 5.5 KW x1. (Water should be exhausted in case of frozen)
Water pump power and quantity: 4kw x 1set
Quantity of air nozzle: 16 pcs (marked in yellow)
Quantity of water nozzle: 16 pcs (marked in blue)
Mould supporter: casting aluminum bar with T shaped slot for fixing mould tool. Supporting rack and water pipe are integrated, which is made of stainless steel tube.
Installation of air and water nozzle: Air nozzles are installed on guard plate and water nozzles are installed on supporting rack.
Electric controlling cabinet and panel with waterproof covering
With air fan device (0.75kw) for drying water on the product surface
Lifting device for calibration: calibration and haul-off are connected by lead screw bolt with deceleration motor of 0.75kw.
Fitted with a device for vertical adjustment
Fitted with a device for horizontal adjustment and can be adjusted by hand


For choosing the proper machine and saving your time, please read these bellow guides carefully
1). What kinds of plastic machinery do you need ? Or what material do you want to process?
2). What capacity do you want? (kg/h )
3). What is the max and min size of the finish products .For example, the width and thickness of sheet(mm)?
4) What is the electric device you need ? Siemens, Omron or domestic ?
5) When do you want the machine? (Times for delivery)
6) Other requirements about the machine you want.

if you are interested in this machine ,please contact me:
mob : +86 13915723896  ( or +86 13817556740 )
 
Jeremy He
 

Aluminium Castings - Sand Castings 

Aluminium is a kind of very important material in the casting field, it has the advantage of lighter weight,  better elongation, better anti-rust feature, easier for machining, and better surface finish compared with Iron Castings and Steel Castings.

Parts mainly include marine handle parts, turbocharger compressor housing, compressor wheel and so on. 

We have the advantages of high and stable quality, strict control on raw material sourcing and inspection, good service and in time feedback for any question from clients, with all these, we have built long-term cooperation with the clients from Europe and USA. 

 

Sand Castings

Sand Castings,Green Sand Casting,Sand Casting Aluminum,Sand Casting Mold

Dandong Hengrui Machinery Co., Ltd. , http://www.hrcastings.com