By changing the materials, it can be used for pumping corrosive gases or corrosive liquids. It is widely used in papermaking, chemical, petrochemical, light industry, pharmaceuticals, food, coal, mineral processing, and other industries.
Features
1. Use imported bearings to ensure accurate location and stable operation of the impeller.
2. Impeller material use cast iron or welded steel, and fully guarantee the impeller stability in a variety of adverse conditions, and greatly increased the pump life.
3. Pump body uses steel, increase the service life of vacuum pump.
4. As the most easily damaged parts, the shaft sleeve uses high-chromium stainless steel, life expectancy has increased by 5 times.
5. Pulley (belt drive) is standard high-precision, reliable operation and long service life and convenient disassemble.
6. Coupling (direct Transmission) uses standard high-strength flexible coupling, flexible component uses polyurethane material, which is stable and reliable operation, long service life.
7. 'Unique top-mounted gas-water separator to save space and reduce the noise.
8. All casting uses resin sand casting, which is good surface quality, pump cooling well.
9. Mechanical seal (optional) is imported, fully guaranteed no leakage in the long-running process.
10. Casing inner wall is similar to the type of oval, ensure the best exhaust results.
Performance Table
Model | Limited Vacuum hpa | Speed r/min | Max. Capacity m³ /min | Power KW | Driven Type | Voltage | Suction mm | Discharge mm |
2BEA-103-0 | 33 | 1300 | 4.9 | 11 | Pulley | 380 V | 65 | 65 |
1450 | 5.6 | 11 | Couping | |||||
1625 | 6.2 | 15 | Pulley | |||||
1750 | 6.7 | 15 | Pulley | |||||
2BEA-153-0 | 33 | 1100 | 7.4 | 15 | Pulley | 380 V | 100 | 100 |
1300 | 8.9 | 18.5 | Pulley | |||||
1450 | 10 | 18.5 | Couping | |||||
1625 | 10.8 | 22 | Pulley | |||||
1750 | 11.5 | 30 | Pulley | |||||
2BEA-202-0 | 33 | 790 | 9.5 | 18.5 | Pulley | 380 V | 125 | 125 |
880 | 11 | 18.5 | Pulley | |||||
980 | 12 | 22 | Coupling | |||||
1100 | 14 | 30 | Pulley | |||||
1170 | 15 | 30 | Pulley | |||||
2BEA-203-0 | 33 | 790 | 14 | 30 | Pulley | 380 V | 125 | 125 |
880 | 16 | 30 | Pulley | |||||
980 | 18 | 37 | Coupling | |||||
1100 | 20 | 45 | Pulley | |||||
1170 | 21 | 45 | Pulley | |||||
2BEA-252-0 | 33 | 565 | 20 | 30 | Pulley | 380 V | 150 | 150 |
590 | 22 | 30 | Coupling | |||||
660 | 25 | 37 | Pulley | |||||
740 | 28 | 45 | Coupling | |||||
820 | 30 | 55 | Pulley | |||||
880 | 33 | 75 | Pulley | |||||
2BEA-253-0 | 33 | 565 | 28 | 45 | Pulley | 380V | 150 | 150 |
590 | 30 | 45 | Coupling | |||||
660 | 35 | 55 | Pulley | |||||
740 | 39 | 75 | Coupling | |||||
820 | 43 | 90 | Pulley | |||||
880 | 47 | 90 | Pulley | |||||
2BEA-303-0 | 33 | 472 | 43 | 55 | Pulley | 380V | 200 | 200 |
520 | 45 | 75 | Pulley | |||||
530 | 48 | 75 | Pulley | |||||
590 | 52 | 75 | Coupling | |||||
660 | 58 | 90 | Pulley | |||||
740 | 67 | 110 | Coupling | |||||
2BEA-353-0 | 33 | 390 | 55 | 75 | Pulley | 380V | 250 | 250 |
415 | 58 | 90 | Pulley | |||||
464 | 65 | 110 | Pulley | |||||
520 | 72 | 132 | Pulley | |||||
590 | 81 | 160 | Coupling | |||||
2BEA-403-0 | 33 | 330 | 78 | 132 | Pulley | 380V | 300 | 300 |
372 | 85 | 160 | Pulley | |||||
420 | 97 | 185 | Pulley | |||||
472 | 110 | 200 | Pulley | |||||
530 | 122 | 250 | Pulley |
Model | Limited Pressure hpa | Speed r/min | Max. Capacity m³ /min | Power KW | Driven Type | Voltage | Suction mm | Discharge mm |
2BEA-355-1 | 160 | 372 | 61 | 90 | Pulley | 380V | 250 | 250 |
420 | 71 | 110 | Pulley | 380 V | ||||
472 | 79 | 110 | Pulley | 380 V | ||||
500 | 83 | 132 | Pulley | 380 V | ||||
530 | 88 | 132 | Pulley | 380 V | ||||
590 | 95 | 160 | Coupling | 380 V | ||||
2BEA-405-1 | 160 | 330 | 93 | 132 | Pulley or Reducer | 380 V | 300 | 300 |
372 | 106 | 160 | 380 V | |||||
420 | 119 | 185 | 380 V | |||||
472 | 130 | 220 | 380 V | |||||
530 | 141 | 280 | 380 V | |||||
2BEA-505-1 | 160 | 266 | 121 | 160 | Pulley or Reducer | 380 V | 350 | 350 |
298 | 139 | 185 | 380 V | |||||
330 | 153 | 220 | 380 V | |||||
372 | 169 | 250 | 6KV | |||||
420 | 186 | 315 | 6KV | |||||
2BEA-605-1 | 160 | 220 | 168 | 220 | Reducer | 6KV | 400 | 400 |
236 | 181 | 250 | 6KV | |||||
246 | 188 | 280 | 6KV | |||||
266 | 206 | 280 | 6KV | |||||
276 | 210 | 315 | 6KV | |||||
298 | 228 | 355 | 6KV | |||||
312 | 234 | 355 | 6KV | |||||
2BEA-705-1 | 160 | 197 | 259 | 355 | Reducer | 6KV Or 10KV | 500 | 500 |
220 | 286 | 400 | ||||||
246 | 318 | 450 | ||||||
266 | 342 | 500 | ||||||
276 | 352 | 560 |
By changing the materials, it can be used for pumping corrosive gases or corrosive liquids. It is widely used in papermaking, chemical, petrochemical, light industry, pharmaceuticals, food, coal, mineral processing, and other industries.
Features
1. Use imported bearings to ensure accurate location and stable operation of the impeller.
2. Impeller material use cast iron or welded steel, and fully guarantee the impeller stability in a variety of adverse conditions, and greatly increased the pump life.
3. Pump body uses steel, increase the service life of vacuum pump.
4. As the most easily damaged parts, the shaft sleeve uses high-chromium stainless steel, life expectancy has increased by 5 times.
5. Pulley (belt drive) is standard high-precision, reliable operation and long service life and convenient disassemble.
6. Coupling (direct Transmission) uses standard high-strength flexible coupling, flexible component uses polyurethane material, which is stable and reliable operation, long service life.
7. 'Unique top-mounted gas-water separator to save space and reduce the noise.
8. All casting uses resin sand casting, which is good surface quality, pump cooling well.
9. Mechanical seal (optional) is imported, fully guaranteed no leakage in the long-running process.
10. Casing inner wall is similar to the type of oval, ensure the best exhaust results.
Performance Table
Model | Limited Vacuum hpa | Speed r/min | Max. Capacity m³ /min | Power KW | Driven Type | Voltage | Suction mm | Discharge mm |
2BEA-103-0 | 33 | 1300 | 4.9 | 11 | Pulley | 380 V | 65 | 65 |
1450 | 5.6 | 11 | Couping | |||||
1625 | 6.2 | 15 | Pulley | |||||
1750 | 6.7 | 15 | Pulley | |||||
2BEA-153-0 | 33 | 1100 | 7.4 | 15 | Pulley | 380 V | 100 | 100 |
1300 | 8.9 | 18.5 | Pulley | |||||
1450 | 10 | 18.5 | Couping | |||||
1625 | 10.8 | 22 | Pulley | |||||
1750 | 11.5 | 30 | Pulley | |||||
2BEA-202-0 | 33 | 790 | 9.5 | 18.5 | Pulley | 380 V | 125 | 125 |
880 | 11 | 18.5 | Pulley | |||||
980 | 12 | 22 | Coupling | |||||
1100 | 14 | 30 | Pulley | |||||
1170 | 15 | 30 | Pulley | |||||
2BEA-203-0 | 33 | 790 | 14 | 30 | Pulley | 380 V | 125 | 125 |
880 | 16 | 30 | Pulley | |||||
980 | 18 | 37 | Coupling | |||||
1100 | 20 | 45 | Pulley | |||||
1170 | 21 | 45 | Pulley | |||||
2BEA-252-0 | 33 | 565 | 20 | 30 | Pulley | 380 V | 150 | 150 |
590 | 22 | 30 | Coupling | |||||
660 | 25 | 37 | Pulley | |||||
740 | 28 | 45 | Coupling | |||||
820 | 30 | 55 | Pulley | |||||
880 | 33 | 75 | Pulley | |||||
2BEA-253-0 | 33 | 565 | 28 | 45 | Pulley | 380V | 150 | 150 |
590 | 30 | 45 | Coupling | |||||
660 | 35 | 55 | Pulley | |||||
740 | 39 | 75 | Coupling | |||||
820 | 43 | 90 | Pulley | |||||
880 | 47 | 90 | Pulley | |||||
2BEA-303-0 | 33 | 472 | 43 | 55 | Pulley | 380V | 200 | 200 |
520 | 45 | 75 | Pulley | |||||
530 | 48 | 75 | Pulley | |||||
590 | 52 | 75 | Coupling | |||||
660 | 58 | 90 | Pulley | |||||
740 | 67 | 110 | Coupling | |||||
2BEA-353-0 | 33 | 390 | 55 | 75 | Pulley | 380V | 250 | 250 |
415 | 58 | 90 | Pulley | |||||
464 | 65 | 110 | Pulley | |||||
520 | 72 | 132 | Pulley | |||||
590 | 81 | 160 | Coupling | |||||
2BEA-403-0 | 33 | 330 | 78 | 132 | Pulley | 380V | 300 | 300 |
372 | 85 | 160 | Pulley | |||||
420 | 97 | 185 | Pulley | |||||
472 | 110 | 200 | Pulley | |||||
530 | 122 | 250 | Pulley |
Model | Limited Pressure hpa | Speed r/min | Max. Capacity m³ /min | Power KW | Driven Type | Voltage | Suction mm | Discharge mm |
2BEA-355-1 | 160 | 372 | 61 | 90 | Pulley | 380V | 250 | 250 |
420 | 71 | 110 | Pulley | 380 V | ||||
472 | 79 | 110 | Pulley | 380 V | ||||
500 | 83 | 132 | Pulley | 380 V | ||||
530 | 88 | 132 | Pulley | 380 V | ||||
590 | 95 | 160 | Coupling | 380 V | ||||
2BEA-405-1 | 160 | 330 | 93 | 132 | Pulley or Reducer | 380 V | 300 | 300 |
372 | 106 | 160 | 380 V | |||||
420 | 119 | 185 | 380 V | |||||
472 | 130 | 220 | 380 V | |||||
530 | 141 | 280 | 380 V | |||||
2BEA-505-1 | 160 | 266 | 121 | 160 | Pulley or Reducer | 380 V | 350 | 350 |
298 | 139 | 185 | 380 V | |||||
330 | 153 | 220 | 380 V | |||||
372 | 169 | 250 | 6KV | |||||
420 | 186 | 315 | 6KV | |||||
2BEA-605-1 | 160 | 220 | 168 | 220 | Reducer | 6KV | 400 | 400 |
236 | 181 | 250 | 6KV | |||||
246 | 188 | 280 | 6KV | |||||
266 | 206 | 280 | 6KV | |||||
276 | 210 | 315 | 6KV | |||||
298 | 228 | 355 | 6KV | |||||
312 | 234 | 355 | 6KV | |||||
2BEA-705-1 | 160 | 197 | 259 | 355 | Reducer | 6KV Or 10KV | 500 | 500 |
220 | 286 | 400 | ||||||
246 | 318 | 450 | ||||||
266 | 342 | 500 | ||||||
276 | 352 | 560 |
Excavator Toolboxes for Aftermarket Komatsu ,Hitachi, CAT, Doosan, Kobelco, Daewoo, Hyundai, Volvo, Kubota, Sumitomo,Deere, Case, Linkbelt, etc. We have so many cabins for so many different types, models and series. You can just send me what you need, I will show you what we have.If you have time visit China, you are very welcome to coming to our factory. You will find our products are with high quality and also cheap price. MOQ is 1 piece.
Excavator Toolboxes, Excavator Toolboxes for Aftermarket Komatsu, Excavator Toolboxes for Aftermarket Hitachi, Excavator Toolboxes for Aftermarket CAT, Excavator Toolboxes for Aftermarket Doosan, Excavator Toolboxes for Aftermarket Kobelco, Excavator Tool
Jiaxing Ganland Auto Parts Co., Ltd. , https://www.ganlandparts.com