Environmental Low Air Pressure Altitude and Temperature Test Lab Equipment

Model NO.: GATC-408
Loading Method: Dynamic Load
Display: Digital
Control: Computer Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Top
Cooling Rate: 0.7c~1.0c/Min (Average)
Pressure Range: RP~0.5kpa
Temp Fluctuation: +/-0.5%
Temp Range: 70c~+150c
Trademark: Grande
Transport Package: Strong Wood Case
Specification: 1100*1850*1700mm
Origin: China
HS Code: 9031200020
Environmental Low Air Pressure Altitude and Temperature Test Lab Equipment
Product description:
High altitude low pressure simulation test chamber/Altitude test chamber
Altitude Test Chambers
Temperature testing at altitudes up to 100,000 feet.
Grande can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:
  • Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.
  • Simulation of high-altitude conditions like might be found in mountainous regions.
NOTE: Altitude test chambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let Grande know as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.
Features
  • Temperature range from -70 to 200°C
  • Altitude range from ground to 100,000 feet
  • Optional humidity control when altitude system is off
  • Chamber interior size specified by customer
  • Automatic altitude control, integrated with temperature controller
               -No manual setting of altitude level!
  • Vacuum pump sized for climb/dive rate required by application
  • Viewing window and cable ports available
Corresponding Standard of the Temperature and Humidity Test Chamber:
1.GB10590-89  Low-temperature and low atmospheric pressure testing condition
2.GB10591-89 High-temperature and low atmospheric pressure testing condition
3. GB11159-89 low atmospheric pressure technical condition
4. GB/T2423.25-1992 Low-temperature and low atmospheric pressure test chamber
5. GB/T2423.26-1992 High-temperature and low atmospheric pressure test chamber
6.GJB150.2-86 High-temperature and low atmospheric pressure(Altitude) test
7,IEC60068-2-1.1990 Testing methods of Low-temperature test chambers
8,IEC60068-2-2.1974 Testing methods of High-temperature test chambers
9,IEC-540
10,ASTM D2436
11,JIS K7212
12,DIN 50011
13,BS2648
14,Mil-Std 202G (conditions 105C, A/B/C/F)
15,Mil-Std 810G (condition 500.5)
16,IEC 60068-2-39
17,IEC 60068-2-40
18,RTCA/DO-160F
19,JIS W 0812
 
Technical parameters:
Model No  GATC-150 GATC-225 GATC-408 GATC-800 GATC-1000
Working room(L) 150 225 408 800 1000
Inner chamber size(mm)W*H*D 500*600*500 500*750*600 600*850*800 1000*1000*800 1000*1000*1000
Exterior chamber size(mm)W*H*D 1000*1600*1400 1000*1750*1500 1100*1850*1700 1500*2000*1700 1850*1600*2250
Packaging volume(CBM) 3 3.5 4.5 5.5 6
G.W.(KGs) 320 350 400 600 700
Testing temperature range -80°C,-73°C,-60°C, -40°C, -20°C, 0°C~+150°C, +200°C (300°C)
Performance Temperature range -65ºC~150ºC
Temp.fluctuation ±0.5ºC(Room pressure)
Temp.accuracy ±2.0ºC(Room pressure)
Heating up time ≤60min(+20ºC~+150ºC,RP,No-Load)
Cooling down time ≤45min(RP) ≤60min(RP) ≤90min(RP)
Pressure range  RP~0.5kPa
Pressure control tolerance ±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa)
Depressurization time ≤20min ≤25min ≤30min ≤45min ≤50min
Working environment Temp:+5ºC~+35ºC;Humidity:≤90%RH;Airpressure:86-106kPa
Material Exterior chamber materia Stainless steel plate+ powder coated
Plastic Injection Molding Service

Why Choose Us for Plastic Injection Molding Service

GZ- proto provides advanced injection molding services, with solutions covering material verification, tool design, prototyping & production, finishing, and quality assurance. Our team of experts is committed to delivering professional technical support. With precise prototypes and production parts, GZ-proto helps you reach your manufacturing goals.

Plastic Injection Molding,Plastic Mold Design,Custom Plastic Molding,Plastic Injection Mold Tooling

Shenzhen ganzoo prototype manufacture co.,ltd , https://www.gz-proto.com