Centrifugal separator consists of two major parts, which are separation mechanism and auxiliary mechanism.
The separation structure of centrifugal separator is drum, which is hollow and of the shape of frustum.Â
The slope of drum inner surface is from 30 to 50 degree, which is made from steel plate flange welding, cast aluminum or glass fiber reinforced plastics. Drum is fixed to the axle by chassis and spins along with the axle.Â
Auxiliary mechanism consists of feeding device, ore discharge device, flush device and the procedure control device
2.Working principleÂ
Ore pulp is delivered by feeding pulp distributor through two location to the inner wall of drum, while the drum is spinning at high speed.
Ore pulp spins along with the drum. Under the action of centrifugal force, the heavier mineral deposits on inner wall and spins along with the drum. The lighter mineral grains spin at a speed different to drum. During the process of spin, lighter mineral grains will be discharged out of the drum. After 3 minutes, the pulp distributor will turn away from normal position and stop feeding ore pulp. After finishing discharging the tailings, discharging pulp distributor will turn away from normal position and be prepared to receive the concentrate. High pressure flushing water valve will switch on automatically and wash the concentrate down off the inner wall. Then the valve will switch off automatically.Â
After discharging all the concentrate, discharging and feeding pulp distributor will return to their normal positions and start another separation circulation.
3.Product ApplicationÂ
Centrifugal separator is known as centrifuge or centrifugal chute. Strong centrifugal force produced by high speed spin strengthens the process of gravity separation and effectively recover the ultrafine ore particles. Nowadays, centrifugal concentrator is widely used for the recovery of gold, tungsten, lead, manganese, iron, etc.
4.Main Features
1. Very effective for the process of ultrafine ore slime, The recovery rate of 37-39 micron is over 90%.
2. Under the action of centrifugal force, the process of gravity separation is strengthened and the separation time is much shortened. Therefore, the capacity of centrifugal concentrator is much bigger.
3. Small land coverage and high automation.
5.Technical Parameters
Model | Drum Dia.(mm) | Drum Slope(°) | Drum Speed(r/min) | Input Size(mm) | Input Thickness(%) | Capacity(m3/h) | Power(kw) | Dimension (mm) |
Weight(kg) |
LX-Φ800x600(Rough) | 800 | 4 | 450 | -0.074 | 15-25 | 1.2-1.5 | 3 | 1920×1300×2540 | 1100 |
LX-Φ800x600(Fine) | 800 | 5 | 380 | -0.074 | 15-25 | 1.2-1.5 | 3 | 1920×1300×2540 | 1100 |
LX-1600 | 1600 | 5 | 105-405 | -0.074 | 15-25 | 1.5-4.5 | 11 | 2900×1900×3900 | 4500 |
LX-2000 | 2000 | 5 | 105-405 | -0.074 | 15-25 | 6-7.5 | 17 | 3566×2334×3900 | 7500 |
LX-2400 | 2400 | 5 | 105-405 | -0.074 | 15-25 | 5-10 | 22 | 3700×2400×4100 | 12000 |
Centrifugal separator consists of two major parts, which are separation mechanism and auxiliary mechanism.
The separation structure of centrifugal separator is drum, which is hollow and of the shape of frustum.Â
The slope of drum inner surface is from 30 to 50 degree, which is made from steel plate flange welding, cast aluminum or glass fiber reinforced plastics. Drum is fixed to the axle by chassis and spins along with the axle.Â
Auxiliary mechanism consists of feeding device, ore discharge device, flush device and the procedure control device
2.Working principleÂ
Ore pulp is delivered by feeding pulp distributor through two location to the inner wall of drum, while the drum is spinning at high speed.
Ore pulp spins along with the drum. Under the action of centrifugal force, the heavier mineral deposits on inner wall and spins along with the drum. The lighter mineral grains spin at a speed different to drum. During the process of spin, lighter mineral grains will be discharged out of the drum. After 3 minutes, the pulp distributor will turn away from normal position and stop feeding ore pulp. After finishing discharging the tailings, discharging pulp distributor will turn away from normal position and be prepared to receive the concentrate. High pressure flushing water valve will switch on automatically and wash the concentrate down off the inner wall. Then the valve will switch off automatically.Â
After discharging all the concentrate, discharging and feeding pulp distributor will return to their normal positions and start another separation circulation.
3.Product ApplicationÂ
Centrifugal separator is known as centrifuge or centrifugal chute. Strong centrifugal force produced by high speed spin strengthens the process of gravity separation and effectively recover the ultrafine ore particles. Nowadays, centrifugal concentrator is widely used for the recovery of gold, tungsten, lead, manganese, iron, etc.
4.Main Features
1. Very effective for the process of ultrafine ore slime, The recovery rate of 37-39 micron is over 90%.
2. Under the action of centrifugal force, the process of gravity separation is strengthened and the separation time is much shortened. Therefore, the capacity of centrifugal concentrator is much bigger.
3. Small land coverage and high automation.
5.Technical Parameters
Model | Drum Dia.(mm) | Drum Slope(°) | Drum Speed(r/min) | Input Size(mm) | Input Thickness(%) | Capacity(m3/h) | Power(kw) | Dimension (mm) |
Weight(kg) |
LX-Φ800x600(Rough) | 800 | 4 | 450 | -0.074 | 15-25 | 1.2-1.5 | 3 | 1920×1300×2540 | 1100 |
LX-Φ800x600(Fine) | 800 | 5 | 380 | -0.074 | 15-25 | 1.2-1.5 | 3 | 1920×1300×2540 | 1100 |
LX-1600 | 1600 | 5 | 105-405 | -0.074 | 15-25 | 1.5-4.5 | 11 | 2900×1900×3900 | 4500 |
LX-2000 | 2000 | 5 | 105-405 | -0.074 | 15-25 | 6-7.5 | 17 | 3566×2334×3900 | 7500 |
LX-2400 | 2400 | 5 | 105-405 | -0.074 | 15-25 | 5-10 | 22 | 3700×2400×4100 | 12000 |
We are the only manufacturer for 5D Wheel Alignment. This wheel alignment is for all kinds of car lifts. 5D Wheel Alignment for Scissors Lift is our patented product. 5D Wheel Alignment For Scissors Lift is for all carshops with scissors lift and limited space. The wheel alignment is installed from ceiling. 5D wheel alignment for scissors lift has four cameras and each of them monitor each target, so the measurement result can be more precise than two cameras. Besides, the sight of cameras are bigger than traditional 3D Wheel Alignment. 5D wheel alignment for scissors lift can be used for vehicles with ultra-long wheelbase.
Advantages of Sucvary 5D Wheel Alignment:
1.Without limitation of space,5D wheel alignment can be used on all kinds of lifts.
2. With 5 cameras, the reference plane is car body, so 5D wheel alignment can measure almost all kinds of vehicles, even if the vehicle is lifted.
3. 5D wheel alignment supports varied operation platforms, point to point transmission by WiFi can shied interference.
4. 5D wheel alignment is supported by powerful cloud service; 5D wheel alignment can connect to IPAD, cell phone, computer and the Internet, supporting remote operation and data upgrade.
5. Four targets are crash resistant and can be exchanged. Fix wheel claws without taking apart wheel hub cover.
6. 5D wheel alignment measurement range is wide, and it can also test wheel deviation besides all traditional parameters.
7. The optional one point wheel clamps can be installed within four seconds.
5D Wheel Alignment for Scissors Lift
5D Wheel Alignment For Scissors Lift
Shenzhen Sucvary Tech Co., Ltd. , https://www.syalignment.com