The fans of LED mobile advertising vehicles may not be worth mentioning at all, but there is also an important link between fans and mobile advertising vehicles. The fan is an electronic component that can give heat to a mobile advertising vehicle and it is relatively easy to dissipate heat. In order to stabilize the speed of driving a mobile advertising vehicle, there will be some failures. The maintenance of LED mobile advertising fan fans is an urgent task.
1. The most frequently used components in the fans of mobile advertising vehicles are the bearings. The bearings are often under a high-speed operation, so the degree of lubrication is also very high, when the LED mobile advertising fan in the process of operating there is some noise, this time using a few drops of lubricant in the LED Losing the bearing of a mobile advertising vehicle. Do not forget to use edible oils. This will damage the vehicle's bearings.
2. If some parts of the fan of the LED mobile advertising vehicle have some looseness, it may be due to some noise emitted during the driving of the vehicle. This will not only interfere with the driving attention of LED mobile advertising vehicles, but will also cause the gaps in the wear and tear of the vehicle bearings to increase. If there are loose parts, you can remove the fan of the LED mobile advertising car, and then tighten the screws. The fan needs to be cleaned regularly so that it can be used without affecting the use and it can be reduced to a certain extent.
3. If the fan of the LED mobile advertising vehicle is performing heat dissipation, the obtained effect is not very good. It may be caused by the fact that the center of gravity of the fan blade of the LED mobile advertising vehicle fan is not caused by the axis. This is also what the old drivers often say about eccentricity. Although this kind of failure seems to be not very serious at the moment, it will be a big danger after a long time. At this point you can remove it, use a thin line and drop it in the middle, wait for a while, see if it sinks in that direction, and then gently place on the grinding wheel where it will sink. Just a few minutes.
A finned tube is a heat transfer device consisting of many parallel metal fins commonly used for heat dissipation and cooling applications. Finned tubes increase the surface area of the pipe, thus increasing the heat transfer efficiency. Finned tubes are commonly used in applications such as air coolers, automotive radiators, condensers, and evaporators. They are also used in industrial heaters and refrigerators to increase heat transfer surface area and improve efficiency.
Finned tube is a kind of new, wear-resistant, efficient heat exchange material, is a kind of energy-saving heat exchange element, it uses high-frequency power source as heat source, the steel strip, steel pipe heating at the same time, so that the fusion welding together into one, with high heat exchange efficiency, large cooling area, long service life, adapt to a wide range of temperature, high pressure characteristics, it can also be made of a variety of materials, Excellent heat transfer, durability, heat resistance and corrosion resistance. Widely used in waste heat recovery, petrochemical, power plant boiler, economizer, bus, industrial and civil construction heating, refrigeration, medical drying, wood drying, food drying system and other industries.
The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.
Finned Tubes,Heat Exchange Finned Tube,Finned Tube Heat Exchanger,Heat Exchange Spiral Finned Tube
Jiangsu Gelan Environmental Technology Co., LTD , https://www.glkj2010.com