KHX-KS65UF2x4-500ml
Technical Data for Blow Molding  KHX-KS65UF2x4-1000ml
1. General Issues
Machine operating manual including Hydraulic, Pneumatic, Assembly drawing, Cooling water.
Max. volume of product: single cavity 500mL
Total weight 12 ton 3.5-4.5bars
Max. output 600pcs/h (250mL product net weight 30-50g,Sufficient cooling water temperature at
8ºC with an intake pressure of between 3.5 to 4.5 bars, with a Min. difference between intake and outlet of 3 bars. )
2. Clamping Unit
Principle: bi-direction synchronous clamping device with double axis.
Linear roller guidance horizontal.
Clamping force: 150KN
Mold platens H x W 400 x 500 mm
Distance between the p;atens: 150-550mm
Clamping unit stroke: 300mm
3. Die Head
Type of die head: Double lays head of accumulator.
Max mouth diameter: 8- 30MM
Max. Storage volume:
Type of temperature sensors: K
Heater power: 15KW
100 point WPS systerm controller (B&R) or  MOOG 100 poing
4. Extruder System
Extruder Screw Barre should be adequate to work with HDPE
Screw diameter: 65-75/30D
Nitride treatment barrel and screw.
Plasticizing efficiency: 80-100 kg/h (HDPE)
Feeding zone grooved with cooling water
Cast-aluminium heater, adopt European mode of connection
Type of temperature sensors:
DC motor drive: 15KW
Cooling by 5 cooling fans.
Raw material hopper with a window.
5.Blow System
Blow Mold system mounted on linear guide under the mold.
Height adjustment mechainsm 150 mm
Blow pin up/down stroke: 150 mm , controlled by hydraulic cylinder
Parison closed
Mechanical adjustment for left and right
6. Take out system
Take out stroke 400 mm
Adopt lear guide and synchronous belt transmission of Servo Driver Motor to advance and retreat
Gripper with the function: auto cooling water
7. Hydraulic System
Hydraulic working pressure 100 -150 bar
Hydraulic system servo pump : 80 L/min
Hydraulic valves:Yuken brand
Oil Temperature sensor showing the screen
Motor power: 7.5-15 KW
Servo system
Servo valve: (REXROTH--From Germany)
Servo oil source:4KW
Piston pump:YUken (YUKEN--From Japan)
Threads of hydraulic block use of screw joint GE(ISO 1179)
8. Pneumatic System
Pneumatic cylinders AIRTEC
Pneumatic valves AIRTEC
Max. pressure of all components: 10 bar
Max. pressure of gauge: 6-8bar
9.Control System
Control System:Moog
Servo WDS control system:
Moog 100point.
Full color 12.4"
Full color 12.4" screen.
Recipe and machine data storage on memory stick (CF)
Emergency stop push buttons (rotationally release) without key
All electric components needs to be for power supply 220V/380V, 50Hz, controller DC24V,
Total rated power: 76 KW
Average energy consumption: 22-30 KW
Main components (Air switch, Contactor) :Schneider intermediate relay: Schneider
Invertot of extuder motor: PARK
Linear transducer: Gefran
Proximity switch: Schneider
Water Cooling Chiller
All pipes for cooling water made of rubber material.
Separate cooling water circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling.
Water consumptions: 10m3/h
11.Machine frame
Clamping unit should be forward: 600 mm, for mold changing
Aluminum profiles for safety doors, with plastic window.
Machine color: according requirement of customer
Overall dimensions of machine LxWxH: 2.8 x 3.2x 3.0 m
For easy removal of the Cutter Head , the ladder front piece is fitted with an eye to lock the cutter and unscrew it by reversing the hydraulic motor. In case this does not suffice, the assembly also has a `flame cut ring. After cutting away this ring, the cutter head will be loosened on the thread of the shaft.The box-type design is best suited for mounting a submersible Dredge Pump. This is a stronger design for heavy duty and longer wear life, because the box-type makes the whole Cutter Ladder heavier than the pipe-type. The use of a submersible pump allows for a larger dredged density at depth.
Photo of our Cutter Ladder:
The cutter ladder front parts are of a pipe or a box-type rigid design, complete with the cutter drive motor, cutter shaft, cutter shaft bearing and side wire swivel blocks. The unit can simply be mounted to the ladder of the dredge, connect hydraulics, greasing and flushing water and is then ready for use. The unit's extra sturdy design ensures a long lifetime.
Cutter ladder is a Cutter Suction Dredger component. The cutter ladder front part is fitted with a cone in order to get an optimal flow of solids into the Suction Mouth. The suction mouth is also designed for this purpose. The high-efficiency slow running hydraulic motor drives the cutter shaft and cutter directly. The high starting torque of the motor helps to prevent the cutter from getting stuck.
Our Technology and Quality:
Offering our client best possible and most sustainable solutions to their requirement. Production procedure
Step1: Drawing and technical requirement analysis, production lofting;
Step2: Material cutting, trimming, groove, cleaning, bending, rolling, dimension & NDT inspection
Step3: From part assemble to whole assemble with accurate template and platform, dimension & NDT inspection, welding, dimension & NDT inspection;
Step3: Casting, forging, stamping, machining if necessary
Step4: Final dimension & NDT inspection;
Step5: Surface treatment;
Step6: Package, Loading and Lashing when delivery;
Our service
Besides above the general specifications, we can also supply some specific pontoons and other similar steel structure as clients' requirements.
Package and shipping
bulk package and bulk vessel transportation
frame container package and frame container transportation
Production and equipment
UniSite knows the importance of advanced technology, equipment, quality and continuously invests in advanced equipment.
Equipment list:
pipeline production equipment
machining equipment
welding equipment
bending press equipment
rolling equipment
shears equipment
CNC plasma cutting equipment
advanced paint room and equipment
auxiliary equipment
Cutter Ladder
Cutter Dredger,Cutter Ladder,Dredge Cutter Head,Branch Cutter
Unisite Group Ltd. , https://www.shipsparts.nl