Use the ground wire should pay attention to the following matters

Hanging the grounding wire is an important electrical safety technical measure. The operation process should be serious, serious, and in line with technical specifications. It must not be careless. Therefore, we must correctly use the grounding wire, standardize the behavior of hanging and dismantling the grounding wire, consciously cultivate rigorous safety work styles, and improve our own safety standards. Only in this way can we avoid hidden dangers beyond a thousand miles to avoid electrical accidents caused by grounding wires. .

According to actual work, the use of grounding wires should pay attention to the following matters.

1, must check the grounding wire before work. Whether the soft copper wire is broken or not, whether the screw connection is loose or not, and whether the elastic force of the wire hook is normal, and if it does not meet the requirements, it should be replaced or repaired before use.

2. Before the grounding line is grounded, it is necessary to inspect the electricity first. The untested grounding line is a common and habitual violation in the grassroots. When it is suspended, the grounding line body cannot contact with the body.

3. The grounding wire is suspended at both ends of the work site to prevent users from being able to reverse power or inductive power. There are many examples of damage caused by this.

4. When the grounding pile is used, it is necessary to dial the physical energy to quickly clear the accident and to ensure the grounding quality.

5, to protect the grounding line. The grounding wire must not be twisted during use. When not in use, the soft copper wire should be properly grounded. After the grounding wire is dismantled, it must not be dropped from the air or thrown anywhere. It must be transmitted by ropes and attention should be paid to the cleanliness of the grounding wire.

Hanging the grounding line is a safety barrier for the maintenance personnel, and it is the lifeline of the electricity staff. It can prevent sudden calls from harming the human body. However, in practical work, due to the frequent use of grounding wires and the seemingly simple operation, people are prone to paralysis. Their importance is often neglected. Incorrect use often occurs, which reduces or sometimes even loses the safety of grounding wires. The protection must be given enough attention.

Fiberglass Duct Rodder

Fiberglass Duct Rodder or push rodder and commonly called python rod by its nature passing through under ground ducts by ups,down negotiating the duct curvature thus very convinient to pull the cables,wires inside the duct,also it can be used to locate the duct block or damage portion identifications.Its has high safety aspects to use underground applicartions because of its non conductivity of electricity,sets a major safety to site workers.

It has been built with rigid sturdy steel tubular fabrication for easy usage at site and can be self coiled in the tubular frame and easily roll like trolley on ground by its wheels fitted at bottom.

fiberglass duct rodder/duct rod

Specifications of duct rodder:

Specification	Rod Diameter (mm)	4-16mm
	Rod Length (m)	15-500m
	Color	blue,yellow,red,white,etc
Material	Rod Inner	extruded by fiberglass and high strength resin at high temperature
	Rod Outer	high density polyethylene coating
	Iron Frame	steel with high-temperature sprayed plastic or spray coating
	Wheel	rubber
	Brake	yes
	Drawing Head	copper
Physical Characters	Technology	pultrusion
	Work Situation Temperature	-40Â°C to +80Â°C
	Tensile Modulus	>30000MPA
Package	Inside	plastic woven strip wind around the frame
Package	Outside	carton box and wooden box

Fiberglass Duct Rodder

Fiberglass Duct Rodder,Fiberglass Duct Rod,Yellow Fiberglass Duct Rodder,Portable Fiberglass Duct Rodder,Duct Rodder

Hebei Long Zhuo Trade Co., Ltd. , https://www.hblongzhuo.com