1.The international fashion type
2.Professional factory :produce spray booth more than 20 years .3.competitive price and assure quality
4.CE Certification approved
5.The size/colour/heating and ducting design can be customized
6.Have many installation records in foreign countries,such as USA, Austrilia,Sweden, United Kingdom, Lithuania, United Arab Emirates and etc.
2.Main equipment:
1). Basement:
A. Adopt to  coating spray on surface and galvanized plates ,the botton legs can adjustable.Â
B. The botton supporting frame can be adjusted optionally to ensure the air flow rate uniform in th booth .
C. loading capacity can up to several tons .
2).Bouble wall panels:
1.With rock wool EPS insulated which has good sealing  and insulation performance ,and also keep the booth inside dust-free .
3)Filter
The ceiling filters can effectively filtering 10 micron particles with filtration efficiency up to 99%.The liberglass can effectively filtrate the paint mist .
4)Fan
The transmission efficiency can achieve 100%,save the energy ,smooyh operation ,low noisyÂ
5)Heating system
The Heat Exchanger is made of imported high temperature resistant stainless plates , the exchanger effeciency is up to 90% ,
6)Enhanced curing system-air nozzles
It makes the curing and solvent volatilization time for the water-borner coating greatly reduces .
| Model | SPL-C-I | |
| Outside Size(mm): | 8050*5250*6500 | |
| Inside Size(mm): | 6920*3820*2600 | |
| Front Door(mm): | 3030(W)*2600(H) | |
| Total Power: | 17kw | |
| Cabin System | Wallboard | EPS colorful steel skin board, wall panel: 60mm thick, ceiling panel: High quality galvanized steel; door use sheet metal process,; safety door use heat preservation panels; four corners: special aluminum alloycolumne |
| Basement: | full grids, galvanized steel sheet construction, three embossed steel ramp ,height 300mm | |
| Intake and exhaust fan system | Intake type:back upper Fan: 7.5KW, Room material: aluminum frame, Inner galvanized sheet, out color-coated sheet. Air supply duct: High quality galvanized steel Wind speed:≥0.25m/s ventilation door use cylinder, Automatic switch. |
|
| Filter system | Inlet air filter use Initial effect filtration cotton , can capture more than 10 μm particles; Top air supply: Medium effect filter cotton, can capture medium effect filter cotton; grilling air exhaust use great Glass fiber cotton;has differential pressure meter. |
|
| Heating system | Italy riello burner,max heating capacity is 180000kcal, the heat exchanger adopts stainless steel plate argon arc welding. Air inlet with mechanical temperature controller | |
| lighting | Upper ceiling light use 8 units 4*30 tube,side light use six units 30KW*4, Total illuminance ≥1000ux.  |
|
| Electrical control system | Use ULor CE certificated good electrical component. Major loop with multiple protection,equipped with lighting switch,temperature time setting,normal spray painting,thermostatic spray-painting baking switch,emergency stop,breakdown alarm,etc. Floor control cabinet,Frequency conversion device. |
|
| Enhanced curing system | Blow from top side, send hot strongly, power of intake fan is 2.2KW,air thru secondary filtration. | |
SPL-C-I spray painting booth
1.The international fashion type
2.Professional factory :produce spray booth more than 20 years .3.competitive price and assure quality
4.CE Certification approved
5.The size/colour/heating and ducting design can be customized
6.Have many installation records in foreign countries,such as USA, Austrilia,Sweden, United Kingdom, Lithuania, United Arab Emirates and etc.
2.Main equipment:
1). Basement:
A. Adopt to  coating spray on surface and galvanized plates ,the botton legs can adjustable.Â
B. The botton supporting frame can be adjusted optionally to ensure the air flow rate uniform in th booth .
C. loading capacity can up to several tons .
2).Bouble wall panels:
1.With rock wool EPS insulated which has good sealing  and insulation performance ,and also keep the booth inside dust-free .
3)Filter
The ceiling filters can effectively filtering 10 micron particles with filtration efficiency up to 99%.The liberglass can effectively filtrate the paint mist .
4)Fan
The transmission efficiency can achieve 100%,save the energy ,smooyh operation ,low noisyÂ
5)Heating system
The heat exchanger is made of imported high temperature resistant stainless plates , the exchanger effeciency is up to 90% ,
6)Enhanced curing system-air nozzles
It makes the curing and solvent volatilization time for the water-borner coating greatly reduces .
| Model | SPL-C-I | |
| Outside Size(mm): | 8050*5250*6500 | |
| Inside Size(mm): | 6920*3820*2600 | |
| Front Door(mm): | 3030(W)*2600(H) | |
| Total Power: | 17kw | |
| Cabin System | Wallboard | EPS colorful steel skin board, wall panel: 60mm thick, ceiling panel: High quality galvanized steel; door use sheet metal process,; safety door use heat preservation panels; four corners: special aluminum alloycolumne |
| Basement: | full grids, galvanized steel sheet construction, three embossed steel ramp ,height 300mm | |
| Intake and exhaust fan system | Intake type:back upper Fan: 7.5KW, Room material: aluminum frame, Inner galvanized sheet, out color-coated sheet. Air supply duct: High quality galvanized steel Wind speed:≥0.25m/s ventilation door use cylinder, Automatic switch. |
|
| Filter system | Inlet air filter use Initial effect filtration cotton , can capture more than 10 μm particles; Top air supply: Medium effect filter cotton, can capture medium effect filter cotton; grilling air exhaust use great Glass fiber cotton;has differential pressure meter. |
|
| Heating system | Italy riello burner,max heating capacity is 180000kcal, the heat exchanger adopts stainless steel plate argon arc welding. Air inlet with mechanical temperature controller | |
| lighting | Upper ceiling light use 8 units 4*30 tube,side light use six units 30KW*4, Total illuminance ≥1000ux.  |
|
| Electrical control system | Use ULor CE certificated good electrical component. Major loop with multiple protection,equipped with lighting switch,temperature time setting,normal spray painting,thermostatic spray-painting baking switch,emergency stop,breakdown alarm,etc. Floor control cabinet,Frequency conversion device. |
|
| Enhanced curing system | Blow from top side, send hot strongly, power of intake fan is 2.2KW,air thru secondary filtration. | |
A heat exchanger is a device designed to efficiently transfer or "exchange" heat from one matter to another. When a fluid is used to transfer heat, the fluid could be a liquid, such as water or oil, or could be moving air. The most well known type of heat exchanger is a car radiator. In a radiator, a solution of water and ethylene glycol, also known as antifreeze, transfers heat from the engine to the radiator and then from the radiator to the ambient air flowing through it. This process helps to keep a car's engine from overheating. Similarly, our heat exchangers are designed to remove excess heat from aircraft engines, optics, x-ray tubes, lasers, power supplies, military equipment, and many other types of equipment that require cooling beyond what air-cooled heat sinks can provide.
There are various types of heat exchangers. our heat exchangers provide air-to-liquid cooling, liquid-to-air cooling, liquid-to-liquid cooling, or air-to-air cooling. With air-to-liquid cooling, heat is transferred from the air to a liquid. One example of air-to-liquid cooling is cabinet cooling. With liquid-to-air cooling, the heat is transferred from the liquid to the air. This type of cooling is generally used to cool process fluids. Liquid-to-liquid cooling is also used to cool process fluids, but the heat is removed by another liquid instead of by air. Lastly, with air-to-air cooling, heat is transferred from one air or gas stream to another.
we has been manufacturing one of the most widely used heat exchanger technologies, tube and fin heat exchangers, for more than 20 years. Tube and fin heat exchangers provide air-to-liquid cooling or liquid-to-air cooling. They consist of fin, hairpin tubes, return bends to connect the hairpins, a tube sheet to support and properly align the tubes, a header with inlets and outlets, side plates for structural support, and usually a fan plate. The tubes provide the path for the liquid coolant, and the fin adds surface area for more heat convection. Copper is often selected for tube and fin material due to its excellent thermal conductivity and compatibility with water and ethylene glycol solutions. However, stainless steel is used for tube and fin when it's necessary for the coolant to be deionized water or other corrosive fluids.
Brazed Plate,Heat Exchanger High Theta Plate,Heat Exchanger Plate For Sea Water,Heat Exchanger Plate
Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com