Rainy days are high traffic accident times. What do you know about rainy days? In order to protect our lives, we must be aware of the precautions of driving in rainy days.
Before the rainy day, the preparation must be done. The wiper must be inspected. The use time of the wiper should not exceed one year. The wiper's sweeping ability during the use period of more than one year will decrease, which will affect the driver's observation of the road surface condition. If you cannot observe the road conditions clearly, it is not conducive to safe driving and the possibility of accidents will increase. Before going out, check the waterproof slot at the front windshield and check regularly to ensure it is open.
Driving on a rainy day, the requirements for the tires are also relatively high, so check the wear of the tire before you travel. In the rainy days, due to the impact of rain, the road surface is slippery, and the requirements for tire pressure are relatively high. Maintaining a higher tire pressure is more conducive to driving in rainy days.
When driving on a rainy day, it is important to keep the field of vision free of obstructions and a good view will allow the driver to make the right strain. When the weather is poor and the weather is dim, you can turn on the lighting in the car. It's a matter of everyone knowing that it's raining and it's slippery. It's important to pay special attention to the tire's sliding on rainy days.
When driving on a rainy day, it is best to ensure low-trafficking and avoid high-speed or variable-speed driving. Also mentioned is that we must be careful about the accumulation of water. The depth of wading should not be too deep, deep enough to cause engine water. If unfortunately, the vehicle wading engine is also turned off due to flooding, then be sure to stay calm. Do not try to start the vehicle. This behavior will damage your car. When driving in a rainy day, pedestrians are also more impatient. We must pay more attention to pedestrians on the road. There must be no mistake in slowing down as much as possible.
The precautions of driving in rainy days are of concern, which is closely related to our own safety.
Ultra high strength heat treated anchor steel bar is a high performance steel that is inductively heat treated from hot rolled steel bars. It is widely used in anchoring, supporting, reinforcement and other projects in coal mine roadways, highway slopes, tunnels, dams, urban foundation pits etc. Pre-stressed concrete works, especially in coal mines.
This product not only has higher strength grade than ordinary hot rolled products, but also effectively reduces rock mass deformation, controls the surrounding rock damage range and has excellent impact resistance, which can resist sudden impact pressure and beneficial to ensure the safety of mining production.
This product has been approved by the Anbiao National Mine Product Safety Mark Center.
Product implementation standards: MT 146.2-2011, Q/AYLTG 003-2011 GB/T 20065-2006.
Steel Bolt,Stainless Steel Bolts,Fully Threaded Stud Bolts,High Strength Steel Bolts
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdbrightsteelbar.com