Phosphate Fertilizer Industry Association promulgated "Opinions on Industrial Structure Adjustment of Phosphate Fertilizer Industry"

The China Industry Association has issued the “Opinions on the Adjustment of the Industrial Structure of the Phosphate Fertilizer Industry”, which will strengthen the guidance and control of new phosphate fertilizer companies, prevent blind expansion, and shut down small and medium-sized enterprises that lack resources, have poor management, and have serious pollution. Turn, and strive to after 3 to 5 years of hard work, so that our country from the big phosphate fertilizer country to the powerful phosphate fertilizer.
The China Phosphate Fertilizer Industry Association pointed out that due to the rapid development of China's phosphate fertilizer industry, the contradictions accumulated within the industry have also become more prominent. For example, overcapacity, single product, weak development of high-end fine chemical products, and weak technological innovation have seriously restricted the health of the industry. The development, coupled with the financial crisis has led to a weak domestic and foreign markets and the huge losses of high-priced raw materials companies, China's phosphate fertilizer industry is in trouble.
The “Opinions” clarified the focus and direction of the structural adjustment of the phosphate fertilizer industry, requiring enterprises to improve the utilization rate of middle and low grade phosphate ore, increase the availability of phosphorus resources, accelerate the industrialization of the selection and enrichment of middle and low grade phosphate ore, and increase the concentration of phosphate rock ore concentrates. The development and investment of technology will accelerate the industrialization of low-grade phosphate ore beneficiation, increase the degree of phosphorus resource protection, ensure the sustainable development of the phosphate fertilizer industry, and accelerate the industrialization and large-scale development of the kiln-process phosphoric acid technology, as kiln-phosphoric acid can not only The direct use of low-grade phosphate rock can also alleviate the shortage of sulfur resources in China.
At the same time, the Opinions require that phosphate fertilizer companies develop and use low-grade phosphate rock to produce new phosphate products, such as the use of low-grade phosphate rock and insoluble potassium minerals to produce molten phosphorus, the development of various controlled-release fertilizers, special fertilizers, and adjustment of phosphorus products. structure. In addition, the Opinions require that the phosphate fertilizer industry increase the comprehensive utilization of phosphogypsum, build 500,000 tons of sulfuric acid and gypsum sulfate, and produce 2 billion phosphogypsum standard bricks.
In terms of production processes, the Opinions require the phosphate fertilizer industry to achieve domestic production of wet-process phosphoric acid purification technologies, and to produce medium and high-grade phosphorus-based fine chemical products such as food grade, electronic grade phosphoric acid and phosphate. Do a good job of recovery of associated resources such as fluorine, iodine, and silicon, and produce anhydrous hydrogen fluoride, iodine, silicon, and their high value-added products.
The "Opinions" also pointed out that in order to optimize the allocation of resources and further increase industrial concentration and international competitiveness, the phosphate fertilizer industry must intensify industrial adjustment in accordance with the ideas of managing increments, adjusting stocks, pushing up pressure, and eliminating disadvantages. Through reorganization, mergers and acquisitions, etc., several large enterprise groups with international competitiveness are formed.

Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flowchat of Batch Waste Tyre Pyrolysis Plant

 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.	ITEM	PROJECT
1	Equipment Model	XY-7	XY-8
2	Door Model	Full Open Door	Full Open Door
3	Suitable Raw Materials	Rubber/Plastic Products	Rubber/Plastic Products
4	Structure	Horizontal Type Revolves	Horizontal Type Revolves
5	Reactor Size	Φ2200*6000mm  Î¦2600*6600mm	Φ2200*6000mm  Î¦2600*6600mm
6	Capacity for One Batch	5-6Mt; 8-10Mt	5-6Mt; 8-10Mt
7	Oil Yield of Tires	40%-45%	40%-45%
8	Work Pressure	Normal Pressure	Normal Pressure
9	Reactor Rotation Speed	0.4R/M	0.4R/M
10	Fuels Choice	Coal, Wood	Coal, Wood, Gas, Oil
11	Power	18KW/H	18-25KW/H
12	Cooling Method	Water Cycling	Water Cycling
13	Type of Drive	External Annular Gear	External Annular Gear
14	Heating Method	Direct	Direct
15	Type of Installation	With Foundation	With Foundation/Integrated Base
16	Noise dB(A)	≦85	≦85
17	Operation Mode	Intermittent Operation	Intermittent Operation
18	Total Weight(MT)	25-40	25-40
19	Installation Space Required	30m*10m	30m*10m
20	Manpower	3~4/batch	3~4/batch
21	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Waste Plastic Pyrolysis Plant

Waste Plastic Pyrolysis Plant,Plastic Pyrolysis Plant,Pyrolysis Of Plastic,Waste Plastic Pyrolysis Oil Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com