Mercedes-Benz A-class long wheelbase sedan
The official name of Mercedes-Benz is A Class L Sport Sedan, which involuntarily reminds us of the BMW 1 Series sedan model launched by the previous BMW. In the entry-level luxury car market where the competition is very fierce, what is the class A sedan version? Where is it?
The A-class sedan version of Mercedes-Benz's new design style, this design style has been controversial since its release, but on the relatively small A-class body, it seems much easier to accept.
The so-called late comers, A-class sedan version of the wheelbase than the hatchback version increased 60mm, reaching 2789mm, than the BMW 1 Series sedan version and Audi A3 have to grow a lot.
The interior of the sedan is the same as the hatchback version. Mercedes-Benz's interior design has always been a strength, and it is easy to create a sense of luxury and technology. The sedan version A is equipped with a 1.3T and 2.0T engine, matching a 7-speed dual clutch transmission. The new car will be on the market in the second half of the year, and then the price will be determined.
Lexus New ES
Probably Toyota's outstanding designers went to Lexus, and when they walked to the Lexus booth, they were really impressed by the appearance of the new ES. The overall style of the new ES is closer to LS, more sharp, and at the same time it looks a little more sporty.
The so-called generation is longer than the first generation, and as a result, the body length of the new ES has increased to reach 4,975mm. Don't forget that the ES adopts a horizontal engine layout.
When it comes to engines, the new ES will be powered by a 3.5-liter V6 engine and a 2.5-liter hybrid system, matched with an 8-speed automatic transmission and an E-CVT transmission respectively. It is not easy to retain a large-capacity self-priming engine in this era. Lexus can also be seen as rigorous in driving quality assurance.
FAW Toyota Zeze IZOA
Takizawa is very similar to GAC Toyota's CH-R. It is only slightly different in some details, but it is still difficult to stop the car from getting hot. The first is because this vehicle is more of a fighting personality and the second is because it looks like It must be a sporty, fun car.
It's not so much a small SUV. It's more like a crossover car. Doesn’t it not mean that it's low-spirited?
Takizawa and CH-R carry a new 2.0L naturally aspirated engine under the Toyota TNGA framework. The maximum power can reach 171 horsepower. The match is a new CVT transmission with a set of transmission gears. The visual inspection of Takizawa/CH-R will also be performed. Become the next "explosive" cannon.
Guangzhou Automobile Honda Tenth Generation Accord
As the "Shenju" in the B-Class sedan, the new ten-generation Accord has also entered the people's field of vision. In recent years, the gradual movement of the family car has become the mainstream, and the Accord is no exception. It has always been good at creating a sports atmosphere. Honda did not blindly exaggerate the movement in the Accord, but still retained some of the calm and calmness that the Accord should have.
The tenth generation Accord offers SPORT TURBO (turbocharged) and SPORT HYBRID (hybrid) two types of power, in which the gasoline model atmosphere 230 TURBO and 260 TURBO, the front figures indicate the maximum torque, the maximum power is respectively 130kw and 143kw. Both are matched with CVT gearboxes.
The tenth generation Accord has also made some upgrades in terms of practicality. For example, the backward A-column and the narrower A-pillar provide a wider perspective. The large-scale update of the interior also allows it to keep pace with the mainstream.
Domestic BMW new X3
The imported X3 cash has been robbed by the Q5, GLC and other rivals because of lower cost performance and relatively mediocre products. Nowadays, the new X3 has ushered in domestically. Whether it can share its original What about cakes?
The new front face design plus the entire standard M suite can be said to let the old flat-looking old X3 suddenly high-profile up. After Q5 and GLC were all made domestically and extended the wheelbase, the domestic X3 still maintained the same wheelbase as the overseas version, but it was 54mm longer than the previous generation X3, reaching 2864mm.
The interior of the new X3 is still familiar with the "BMW" style, but in the configuration of the new X3 is also quite kind, in addition to the entire Department of the standard M suite, with height adjustment and steering assisted automatic LED headlights, electric memory leather seats The configuration of the electric trunk, etc., appeared on the X3 as standard on the entire system.
Domestic Infiniti QX50
The old-looking QX50 finally ushered in its replacement. Dongfeng Infiniti also domestically produced it in a very short period of time and is expected to be available for sale in June.
Due to the change in the layout of the transversal engine, the new car has also added two predecessor models to the product line while improving the utilization of the interior space of the vehicle, plus four four-wheel drive models, a total of six models, with a pre-sale price of 350,000. .
The new QX50 uses Infiniti's new design language, which at first looks more like the QX60's "lean version." Body size is not as good as the same level of BBA, but the 2798mm wheelbase is also a normal standard.
The new car is equipped with a new high-power 2.0T engine, respectively, 272 horsepower and 245 horsepower matching CVT gearbox, the data point of view should have a good performance.
The interior of the new QX50 has finally caught up with the pace of the times, and used to seeing the older old QX50, and suddenly felt that the interior of the new car couldn't be more decent. In fact, only QX50 replacement time is late, Q50 has long used a similar style of interior design.
Economical Advertising Plasma Cutting Machine
1. Imported guide rail, double four ball slider, heavy loading capability, smooth operation, high precision, long life.
2. High-speed stepper motor and driver, Y-axis using a dual-motor drive, to make high-speed operation up to 20 meters above the blank line speed, with the high power spindle can greatly enhance the carving speed more .
3. whole steel structure, high temperature tempering after welding to eliminate the stress treatment, distortion free, strong and lone life.
4. The plasma with high cutting speed, high precision, small slit, neat. Under traditional CNC system ,improved control method of cutting, avoid the secondary processing.
5. During the plasma is cutting, if the torch of plasma break at any point , take the torch out of the machine, adjust the torch, then the torch will automatically return to break points
6. Plasma can be automatically increased
Advertising industry:
Advertising signs, logo making, decorative products, production of
advertising and a variety of metal materials.
Mold Industry:
Engraving metal molds made of copper, aluminum, iron and so on.
Metal industry:
For steel, Carbon Steel, Stainless steel, alloy steel, spring steel, copper plate, aluminium plate, gold, silver, Titanium and other metal plate and tube
Trying to figure out which model is right for you?
Contact our team to learn more about it.
Economical Advertising Plasma Cutting Machine
Plasma Cutter,Plasma Cutting Machine,Cnc Plasma Cutting Table,Economical Advertising Plasma Cutting Machine
Jinan Vmade CNC Machine Co.,Ltd , https://www.vmadecnc.com