Small details are not ignored! Small i teach you how to maintain the car after rain and snow

During the 2015 New Year, the capital could be considered a few snow games. Although Harbin netizens ridiculed: “You are also called snow, and you don’t think it is dandruff...” but you still let people get a “snow addiction”. Is it posted or microblogging, circle of friends, snow, are the first protagonist of the screen.
The general snow, the road is not frozen, the impact on traffic safety is not great, but the body after the snow melts some ordinary humble places easily contaminated with sludge, the owner still have to clean up some, following the first car Net i to see what parts need cleaning and maintenance.

    Clearance of the door gap before cleaning

    After rain and snow, wet roads often encounter muddy roads. When a car is driving, the sludge on the road surface will splash into the gaps on the underside of the vehicle, especially at the cracks in the doors. If the cleaning is not done in time, the joints Sealing tapes will gradually age, and there is a lot of attention on such parts as the A-pillars and the front windscreen joints. Therefore, after the rain and snow, the owner must not forget to check the sealed state of the car, to keep these voids dry.
Wheel stubborn stains need to pay attention

    The wheel hub is also a place where sludge is collected, as the dirt in the traffic will splash on the wheels of the car. Although each car wash can wash away some of it, the car wash shop will not wash it so carefully that it will leave black spots and spots. The wheels will change over time. It may turn yellow and black, or it may accumulate very thick dirt. It looks like no difference from a flooding vehicle. Therefore, the owner tries to use a wheel brush that specializes in wheel cleaning to clean the sludge in the wheel gap. In addition, if it is not difficult to clean dirt such as asphalt, the daily wheel cleaning can use toothpaste and toothbrush. The toothpaste uses non-fluorine because long-term use of fluorine-containing toothpaste will erode the protective film on the hub.
Clearing sunroof rails is the key
    The sunroof of the car is relatively weak, and it is possible to encounter the situation of “light rain inside the car” during rainy days. There are generally many sand accumulations in the slides and crevices of sunroofs. If they are not cleaned after rain and snow, they will wear out parts of sunroofs. The vehicles mainly remember to add lube oil to the sunroof rails. A plastic protective agent or talc powder should also be sprayed on the plastic parts such as the sealing tape. Generally, after using for 2 to 3 months, clean the sealing tape or slide rail with gauze and wash it with water. Oil or butter on it.
Wiper inspection cannot be ignored
    The wiper is an important part of rain and snow, but the wiper is likely to be aged or damaged for a long time. It will seriously reduce the effect of the wiper, and it will not be able to timely clean the rain on the windshield glass. The safety factor will naturally be greatly reduced. Therefore, after the rain and snow days, the car mainly remembers to clean the wipers, but also pay attention to whether there is uneven speed and swing during the wipe. If the windshield wiper is poorly wiped, separate the wiper strip from the windshield glass, soak the wiper with water, grind the wiper blade back and forth 4-5 times with 800 water sandpaper, rinse with clean water, and put it back into the windshield.
Ignition system must be promptly dehumidified
    If a vehicle owner encounters an engine that is not easy to start, sometimes even if it is forced to start up, it will be weak. This kind of problem may be due to leakage due to moisture in the ignition system. To solve this problem is not difficult, only need to check the moisture conditions of the engine and ignition system, with particular attention to the ignition system interface and outside the pipeline whether the condensation of water droplets, timely drying can be.

Brief introduction
High Precision 5C COLLET, also known as spring collet, is mounted on a drill \ milling machine, drilling and milling chuck, its function is to clamp drill cutter or knife. Er flexible collet is currently the most used. Its stable performance, high accuracy by the majority of manufacturers trust. All products are precision grinding.

Specification
1. Material: 65Mn
2. Hardness: HRC44-48 
3. Progress steps 1mm or 1/64" 
4. Are 6 ditch way in front and back
5. Sincerely service

Products advantages:
1. high temperature treatment, hardness uniformity.
2. full bright appearance, good elasticity
3. precision stability, durable and not easy
4. Accuracy: made in 65 mn numerical control handle, have higher service life.

5C Collets

5C Collets,Precision 5C Collets, 5C Round Clamping Collets,Whosale 5C Collets

SISHUI TELI TOOL CO.,LTD. , http://www.er-collets.com