Sprinklers Pumps Occasionally, when the sprinkler works, sprinkler pumps do not work. When this happens, many drivers are overwhelmed. For this kind of phenomenon, many people think that there is a problem with the quality of the Sa-pump. In fact, the working principle of the sprinkler pump is a mechanical seal type. After a certain period of time, the pump components must undergo some necessary maintenance. Below, Hubei Chengli Special Purpose Vehicle Co., Ltd. answered several questions about the non-operation of sprinkler pumps.
First of all, the reason why the sprinkler does not work properly is generally divided into the following categories:
1. There is not enough fluid or fluid in the pump body.
2, suction pipe leakage.
3, speed is too low.
4, the suction process is too high or the suction pipe is bet.
5. Excessive leakage of mechanical seals.
Solution:
1, add enough liquid.
2. Check and eliminate air leakage.
3, adjust the speed.
4, reduce suction or shorten the suction line.
5. Repair or replace the mechanical seal.
First of all, the reason why the sprinkler does not work properly is generally divided into the following categories:
1. There is not enough fluid or fluid in the pump body.
2, suction pipe leakage.
3, speed is too low.
4, the suction process is too high or the suction pipe is bet.
5. Excessive leakage of mechanical seals.
Solution:
1, add enough liquid.
2. Check and eliminate air leakage.
3, adjust the speed.
4, reduce suction or shorten the suction line.
5. Repair or replace the mechanical seal.
Beam Highway Guardrails,W Beam Highway Guardrail,Highway Guardrail
Fenghua Jade Motor Co., Ltd. , http://www.gosbearing.com